Configuring the Network Management

The Network management allows you to change synchronisation mode and to check which communication ports are used for network communication.

Note: You must do the following steps on leader and followers computers.

  1. Click the Multiscreen menu, Launch Multiscreen.

    A window appears.

  2. Click Network management.

    A window appears.

  3. Set the parameters.

  4. Click OK.

    The configuration is saved in the MultiScreen.cfg file located in the C:\ProgramData\Ansys\v2XX\Optical Products\MultiScreen directory.

    Warning: To avoid the same modification on all the follower computers, you can copy this file from the Leader computer to all the Follower computers at the same location.

  5. Click OK.

    The configuration is saved in the MultiScreen.cfg file located in the C:\ProgramData\Ansys\v2XX\Optical Products\MultiScreen directory.

    To avoid the same modification on all the followers computers, you can copy this file from the leader computer to all the followers computers at the same location.