Contents Sources » Sources CreationPrint page Sources Creation You can create all kinds of light sources thanks to different sources types. This section contains the following topics:Creating an Interactive Source An Interactive Source generates specific and monochromatic light rays which are useful to understand the behavior of a light beam through an optical system. Ray File SourceA Ray File Source emits specific rays according to a pre-calculated source (a .ray file) that contains information regarding the position, direction and wavelength of each ray.Surface SourceA Surface Source can be created on any face of a geometry and uniformly emits light on each point of a surface.Display SourceThe Display Source allows you to simulate the rendering of lit displays.Light Field SourceA Light Field Source reads the optical light field file *.olf generated by the Light Field sensor to emit light during an inverse simulation run.Creating a Luminaire Source The Luminaire Source allows you to model artificial light for outdoor and indoor lighting. Thermic SourceYou can create a Thermic Source by directly selecting the emissive faces of the source in the interface or use a temperature field file bounding the field of action of the thermic source. Ambient SourcesWith an Ambient Source, you can model natural environment light such as the sun and sky. « Introduction to OpticsCreating an Interactive Source »