The following procedure helps you modify a post processed Optical Part Design geometry
with the Post Processing feature.
Note:
The Post Processing is in BETA mode for the current release but is deprecated. Instead we recommend
you to use the
Block Recording Tool for the
same capabilities.
As of version 2024 R1, creating a Post Processing is no longer possible. However you can
still load a previous project containing a Post-Processing feature and modify it.
To modify a post processed Optical Part Design (OPD) geometry with the Post Processing:
-
Edit the Post Processing feature related to the OPD feature.
-
In the 3D view, click Start recording .
The Block Recording panel opens with the list of design
operations already applied and recorded.
-
Add or modify any SpaceClaim design operation on the OPD geometry.
-
Once you applied the design operations, open the Post Processing feature and click to
stop recording.
-
In the 3D view, click Compute
to apply the design
operations.
Note: If you activated the
Automatic
Compute on the Post Processing feature, the design operations are automatically
reapplied on the OPD geometry without a manual compute.
The design operations are applied on the modified OPD geometry without having to reapply
them manually. Links to Speos features are kept.
You can recompute the simulation using the
OPD geometry to regenerate and update the results.