Non-Compatible Speos Features and Actions with the Recording Tool
The following page provides you with the Speos features and actions that cannot be recorded in the Block Recording tool.
Important: The following list may not be exhaustive. Some features or actions might be
recorded, however they are not considered as officially supported/compatible.
You cannot record:
- the Sub-folder creation in the Speos tree.
- the object move between folders in the Speos tree.
the Generic selection when defining a Speos feature.
Instead, use the specific selection to select elements such as Source, Sensor, Geometry.
- the Simulation Options.
- the following actions from Contextual Menus:
- Light Guide: Export As CSV File
- Micro Optical Stripes: Export As CSV File
- Micro Optical Stripes: Extract Tooling Path
- LiDAR Simulation: Export
- LiDAR Simulation: Linked Export
- LiDAR Simulation: Isolate
- Direct Simulation: Export
- Direct Simulation: Linked Export
- Direct Simulation: Isolate
- Inverse Simulation: Export
- Inverse Simulation: Linked Export
- Inverse Simulation: Isolate
- Interactive Simulation: Export Rays as Geometry
- Light Box Export, when right-clicking on Password: Generate Password
- OPTProjectedGrid Result: Export projected grid as geometries
- Ray File Source: Optimize ray file for Speos simulation
- UV Mapping: Insert a new UV map below
All actions from the Feature Options
Note: To record them, access the actions from the Options and Advanced Settings of the feature definition panel.