Components
Known Issue | Workaround or Solution |
---|---|
Multiselection Issue: when you first select a Speos Component from the Simulation panel, then select using [ctrl] a geometry from the Structure panel, the selection of the Speos Component is lost. (TFS 1009970) | To perform the multiselection, select the geometries from the Structure panel first, then the Speos Components from the Simulation panel. |
When creating a 3D Texture, the projection of some 3D Texture elements on the edges of the surface may appear as floating along the vertical axis and not positioned on the surface. (TFS 777597) |
Try to:
|
If you modify a Speos Light Box that is used in a Speos Pattern feature, the Speos Pattern does not update with the modified Speos Light Box. (TFS 706919) | Clear the Pattern File field in the Speos Pattern feature, then reimport the Speos Light Box to get the modifications. |
Speos Light Box: if you select a sub-feature of a Speos Light Box to add to a simulation, the link in the simulation to the sub-feature might be lost after the Speos Light Box Import re-compute. (TFS 639072) | Select the Speos Light Box Import instead of the sub-feature of the Speos Light Box. |
No OPT3D Mapping file is generated after creating a 3D Texture. (TFS 425524 SF 32620) | Create a new 3D Texture to generate the OPT3DMapping file. |
Placing the origin point of the 3D texture tangent to the support geometry cause construction issues. (TFS 202323) | Slightly shift the point from the support surface so that it is no longer tangent with the support and regenerate the 3D texture. |
Components cannot be imported as pattern files when creating a 3D texture. (TFS 256663) | Use a body instead of a component. |