Specifying UDP Parameters

The User Defined Primitive Operation dialog box allows you to set the specific parameters required for a UDP.

In the Parameters tab, a list of the parameters associated with the UDP is displayed along with the value, unit, evaluated value, and description for each parameter. To change a parameter:

  1. Select the Value cell in the row corresponding to the parameter to be changed. The cell becomes editable. Enter the desired Value for the parameter.
  2. Click on the cell under Unit to obtain a list of the available units for the parameter. Select the desired Unit.
  3. When the desired changes have been made, click OK to create the geometry defined by the UDP and the parameters you have entered.

The Info tab provides information about the UDP.

Related Topics 

Drawing a Segmented Helix with Polygon Cross-Section Using a User-Defined Primitive

Drawing a Segmented Helix with Rectangular Cross-Section Using a User-Defined Primitive

Drawing a Spiral Using User-Defined Primitives

Parameters for RMxprt User-Defined Primitives