Placing Components in the Maxwell Circuit Editor Schematic

To place a circuit component:

1. Click the Components tab in the Component Libraries Window.
2. In the tree, expand the Maxwell Circuit Elements branch.
3. Expand the branch containing the component you want to place. The choices are Dedicated Elements, Passive Elements, Probes, and Sources.
4. Click to select the name of the component you want to place.
5. Drag the component to the Schematic window.
   A diagram of the component appears connected to the mouse pointer.
6. Release the mouse button to place the component in the location you prefer.
7. To place a second component of the same type, move the mouse pointer to another location, and release it again.
8. To exit from placement mode, do one of the following

• To place the component a final time before exiting, press ENTER.
• To exit without placing the component again, press SPACE.
  Tip: To access these commands, you can also right-click and select one of the following from the shortcut menu:

  • Place and Finish
  • Finish