Integration with Ansys Workbench during Ansys Electromagnetics Product Installation

You can choose to integrate Ansys Electromagnetics products with Ansys 2024 R2 during installation as follows:

  1. If you have not already installed Ansys 2024 R2, do so before proceeding. Refer to the Ansys documentation for instructions on installing the Ansys 2024 R2 software.

  2. Launch Autorun.exe or Setup.exe for the Ansys Electromagnetics product you wish to install.

  3. Proceed through the installation dialogs.
  4. When the Integration with Ansys 2024 R2 dialog displays, select the Yes radio button to have the installer automatically integrate the Ansys Electromagnetics product with Ansys 2024 R2.
    5. Note: If you choose not to integrate the product with Ansys 2024 R2 during installation, you can perform this step after installation.
  5. Complete the product installation and exit the installer.