Import Mesh for Transient Solutions

The Import mesh check box can be selected in the "target" design if the mesh for the same geometry is to be used in the analysis. This setup is designed to be generally applicable to all transient solutions. This feature is not necessarily related to the dynamic demagnetization distribution capability.

If the Import mesh feature is selected, the Setup Link button becomes active, the Setup Link dialog box, which includes an Additional mesh refinements tab automatically appears, and the mesh will be imported from the source design to the target design. Refer to Setup Link for Transient Solutions for details on setting up this link.

Note: The usual way to create geometrically equivalent designs is by copying all geometry objects from one design and then using Import From Clipboard in the other design.