Define Wires, Conductors and Windings of NSSM Stator

In the Winding tab, define the wire, conductor, and winding of the stator.

Winding Layers	The number of layers in the stator winding. Select the winding layers from the drop-down menu (available choices 1 and 2).
Winding Type	The type of the stator winding. Set the winding type to Editor to use the Winding Editor dialog to design the coil windings
Parallel Branches	The number of parallel branches in one phase of the stator winding.
Conductors per Slot	The total number of conductors in each stator slot. This value is the number of turns per coil multiplied by the number of layers. Enter 0 to have RMxprt auto-design this value.
Coil Pitch	The coil pitch measured in number of slots. The coil pitch is the number of slots separating one winding. For example, if a coil starts in slot 1 and ends in slot 6, it has a coil pitch of 5.
Number of Strands	The number of wires per conductor. Enter 0 to have RMxprt auto-design this value.
Wire Wrap	The thickness of the double-sided wire wrap. Enter 0 to automatically obtain this value from the wire library.
Wire Size	Wire size (0 for auto-design). You can assign wire size of round wires or rectangle wires. When the slot type you selected is 1 to 4, round wires are used. When the slot type you selected is 5 or 6, rectangle wires are used.