Viewing Ansys Electronics Desktop Design Details

When you insert an Ansys Electronics Desktop design into a project, it is listed as the second node in the project tree. It is named Ansys Electronics DesktopModeln by default, where n represents the order in which the design was added to the project. Expand the design icon in the project tree to view all of the specific data about the model, including its boundary conditions and material assignments, and field solution and post-processing information.

The Ansys Electronics DesktopModeln node contains the following project details:

3D Components	Displays any 3D Components added to the design.
Model	Displays the model geometries in the design.
Thermal	Displays the thermal boundary conditions assigned to an Icepak design, which specify the field behavior at the edges of the problem region and object interfaces.
Monitor	Displays the point and face monitors created in an Icepak design.
Solar Loading	Displays the solar loading assignments in an Icepak design.
Initial Temperature	Displays the initial temperature assignments in a transient Icepak design.
Mesh	Displays the mesh regions created in an Icepak design.
Analysis	Displays the solution setups for an Ansys Electronics Desktop design. A solution setup specifies how Ansys Electronics Desktop will compute the solution.
Optimetrics	Displays any Optimetrics setups added to an Ansys Electronics Desktop design.
Results	Displays any post-processing reports that have been generated.
Field Overlays	Displays fields overlay plots, which are representations of basic or derived field quantities on surfaces or objects. Plot folders are listed under Field Overlays. These folders store the project's plots and can be customized. See Setting Field Plot Defaults for information on how to customize the plot folders.
Documentation	Displays files you have added as documentation.
Definitions	Displays definitions for Icepak, including Components, Materials, and more (as applicable).

Note:

To edit a project's design details:

In the project tree, double-click the design setup icon that you want to edit.

A window appears with that setup's parameters, which you can then edit.