Seeding the Mesh

In HFSS 3D Layout, mesh operations are optional mesh refinement settings that enable you to provide HFSS 3D Layout with engineering guidance based on your knowledge of the parts of the model geometry that are critical to the structure's electromagnetic performance. Providing such guidance prior to beginning the adaptive analysis process can reduce (sometimes extensively) the number of passes necessary to converge upon a field solution as well as the final number of tetrahedra in the mesh for that solution. Although adaptive analysis convergence targets areas where field behavior is found, refining the mesh using more than the standard criteria, such as material characteristics, can result in finding areas of critical field behavior as soon as the first few passes are solved.

The technique of guiding the mesh construction is referred to as "seeding" the mesh.

You can instruct HFSS 3D Layout to refine the length of tetrahedral elements on a surface or within a volume until they are below a certain value (length-based mesh refinement) or you can refine the surface triangle length of all tetrahedral elements on a surface or volume to within a specified value (skin depth-based mesh refinement.) These types of mesh operations can be defined at any time. If you apply them before the adaptive solution process, they are used to refine the initial mesh after it has been generated. You can also choose to generate a mesh without solving, in which case mesh operations are applied to the current mesh.