Run the Quick Eye Analysis and Display Results

1. Run the simulation:

• From the Circuit menu, select Analyze. If the circuit is set up correctly, the analysis begins immediately and a progress bar appears.
• If the analysis is not successful, check the Message Manager window for an explanation, and then take corrective action.

2. Display results:

• From the menu bar, click Circuit, then click Results >Create Standard Report. (Alternatively, select Create Standard Report on the Results icon in the Project Manager window.)

For more information, see QuickEye Analysis Outputs.

For information on reporting the Peak Distortion Analysis (PDA) data, see Peak Distortion Analysis.