Uncovering Faces

Uncover a surface of a 3D object using the Modeler> Surface> Uncover Faces command. Uncovering the surface of a 3D solid object results in an open 2D sheet object.

To uncover the face of a 3D object:

  1. Switch to the Face selection mode: Click Edit> Selection Mode> Faces.
  2. Select a face of the object you want to uncover.

    From the menu bar, click Modeler> Surface> Uncover Faces. The selected face is uncovered, leaving an open face on the object.

Note:

You can uncover one face of a 3D object at a time. If you select multiple faces, only the first face will be uncovered.