Analysis Options Dialog Box
To perform analysis on an object according to specified features and tolerance values:
- Select the object you want to analyze and click Modeler > Model Analysis > Analyze Objects.
This displays the Analysis Options dialog box, with the Analysis Options tab selected. Selecting Modeler > Model Analysis > Heal also displays this dialog box. If, during Modeler > Import... you select Heal Imported Objects and Manual, you also see this dialog box.
- If desired, check the Perform Entity Check Errors check box.
This enables the Check Level menu. The setting can be Basic, Strict, or Comprehensive. See: Modeler Validation Settings.
- If desired, click the check boxes to enable and set the Detect Feature settings:
- Detect Holes, and specify the Maximum Radius.
- Detect Chamfers, and specify the Maximum Width.
- Detect Blends, and specify the Maximum Radius.
- If desired set the Detect Small Entities features and tolerance values.
- Small Edges, length less than
- Small Faces, area less than
-
Sliver Faces, which enables:
- Object Bounding Box Scale Factor
- Sliver Edge Width
- Click the Properties tab to see a listing of the geometric properties of the selected object.
- Clicking OK on this dialog displays the Model Analysis dialog box, which contains the results of the analysis.