Copy and Paste of 2D and Circuit Report and Trace Definitions

You can copy and paste report and individual trace definitions within a single design or across designs. The report or trace definition is evaluated in the context of the target design or report.

Note: If the report or trace definition contains properties that do not exist in the target design (e.g., a port name) an error is posted that indicates a solution does not exist for this trace.

Note: You must copy and paste trace definitions between the same report types. For example, you cannot copy a trace from a Modal Solution Data report and paste it in a Far Fields report.

To Copy a Report Definition:

From the Project Manager window, expand the Results folder. Then right-click the report and select Copy Definition.

To Paste a Report Definition:

From the Project Manager window, right-click Results and select Paste. A new report is created and it contains the copied definitions.

To Copy an individual Trace Definition(s):

From the Project Manager window, expand the Results folder and the report. Then right-click the trace or traces and select Copy Definition.

To paste the Trace Definition(s):

Right-click the report in the target design to copy the trace or traces and select Paste.

A new trace(s) is added to the report and it contains the copied trace definition(s).

Note:

If you copy and paste a report or trace definition to a design which contains a definition with the same name, then an incremented number is appended to the pasted report or trace name.

Related Topics:

Copy and Paste of Report and Trace Data

Working with Traces

Editing the Display Properties of Traces