Copy and Paste 2D and Circuit Report and Trace Data

You can copy and paste report and individual trace data within a single design or across designs. The report and trace definitions and all underlying data in the report or trace are copied and pasted to the target design or report.

To copy all data from a report:

Right-click the report name in the Project Manager window and select Copy Data, or use the menu bar Edit > Copy Data, or right-click within a plot to display and select Copy Data.

To paste copied report data:

Right-click Results in the Project Manager window of the target design and select Paste.

To copy data from an individual trace(s) in a report:

Right-click the trace or traces under a report name in the Project Manager window and select Copy Data.

To paste copied trace data:

Right-click the report in the target design to copy the trace data to and select Paste.

Note: If you copy and paste report or trace data which contains the same name definition as a report or trace in the target design then an incremented number is appended to the pasted name.