MatML
The following properties can be exported to MatML, depending on which data table you are exporting from.
Note: Only compatible with MatML Version 3.1.
MaterialUniverse
- Density
- Designation
- Electrical resistivity
- Electrical resistivity with temperature
- Poisson's ratio
- Specific heat capacity
- Specific heat capacity with temperature
- Tensile strength
- Tensile strength with temperature
- Thermal conductivity
- Thermal conductivity with temperature
- Thermal expansion coefficient
- Thermal expansion coefficient with temperature
- Thermal expansion coefficient with temperature_Reference Temp
- Yield strength (elastic limit)
- Yield strength with temperature
- Young's modulus
- Young's modulus with temperature
ASME BPVC
- Density
- Min. tensile strength
- Min. yield strength
- Moduli of elasticity
- Poisson's ratio
- Tensile strength
- Thermal conductivity
- Thermal expansion
- Yield strength
Global Polymers Plastics
- CLTE, Flow
- CLTE, Flow (TMA)
- CLTE, Transverse
- Coeff of Thermal Expansion vs. Temperature
- Density
- Poisson's Ratio
- Specific Heat Capacity
- Specific Heat Capacity vs. Temperature
- Tensile Modulus
- Tensile Modulus vs. Temperature
- Tensile Modulus vs. Temperature, Dynamic
- Tensile Strength
- Tensile Strength (Elastomers)
- Tensile Strength at Break
- Tensile Strength at Yield
- Tensile Strength at Yield (Elastomers)
- Tensile Strength at Yield MD (Films)
- Thermal Conductivity
- Volume Resistivity
- Volume Resistivity (Cured)
MMPDS-2024
- Density
- Modulus, L
- Poisson's Ratio, L
- Specific Heat
- Specific Heat with Temp.
- Tens. Ult. Stress (L-dir) with Temp.
- Tens. Yield Stress (L-dir) with Temp.
- Tensile Modulus (L-dir) with Temp.
- Thermal Conductivity
- Thermal Conductivity with Temp.
- Thermal Expansion
- Thermal Expansion with Temp.
- Ultimate Tensile Strength, L
- Yield Strength, L