EditAntennaArraySetup

Modifies the antenna array setup. There are 3 choices in the setup. The default is set to No Array Setup. There are two (other) kinds of arrays that the user can set: Regular Array Setup and Custom Array Setup.

UI Access Right-click on Radiation in the project tree, select Antenna Array Setup...
Parameters
Name Type Description
<AntennaArrayParams> Array Structured array.

["NAME:ArraySetupInfo",

"UseOption:=", <string "No Array" | "Parametric Array" | "Custom Array">,

<ParametricArrayParams> | <CustomArrayParams>]
<ParametricArrayParams> Array Structured array.

["NAME:ParametricArray",

"DesignFrequency:=", "<value><unit>",

"LayoutType:=", <integer>,

"CenterCellX:=", "<value><unit>",

"CenterCellY:=", "<value><unit>",

"CenterCellZ:=", "<value><unit>",

"SpecifyDesignInWavelength:=", <boolean>,

"WidthSpacing:=", "<value><unit>",

"WidthSpacingInWavelength:=", "<value>",

"Width:=", "<value><unit>",

"WidthInWavelength:=", "<value>",

"LengthSpacing:=", "<value><unit>",

"LengthSpacingInWavelength:=", "<value>",

"Length:=", "<value><unit>",

"LengthInWavelength:=", "<value>",

"SymmetryType:=", <integer>,

"StaggerAngle:=", "<value><unit>",

"StaggerType:=", <integer>,

"UDirnX:=", "<integer>",

"UDirnY:=", "<integer>",

"UDirnZ:=", "<integer>",

"VDirnX:=", "<integer>",

"VDirnY:=", "<integer>",

"VDirnZ:=", "<integer>",

"WeightType:=", <integer>,

"EdgeTaperX_db:=", "<integer>",

"CosineExp:=", "<integer>",

"DifferentialType:=", <integer>,

"Behavior:=", <string>,

"ScanAnglePhi:=", "<value><unit>",

"ScanAngleTheta:=", "<value><unit>",

"UDirnPhaseShift:=", "<value><unit>",

"VDirnPhaseShift:=", "<value><unit>"]
<CustomArrayParams> Array Structured array.

["NAME:CustomArray",

"NumCells:=", <int>,

<CellsParamsArray>]
<CellsParamsArray> Array Structured array.

["NAME:Cell",

<CellParams>, <CellParams>, ...]
<CellParams> Array Structured array.

["Name:<CellName>",

"XCoord:=", <double>,

"YCoord:=", <double>,

"ZCoord:=", <double>,

"Amplitude:=", <double>,

"Phase:=", <double>]
Return Value None.

 

Python Syntax EditAntennaArraySetup(<AntennaArrayParams>)
Python Example 
oModule.EditAntennaArraySetup(
[
"NAME:ArraySetupInfo",
"UseOption:="		, "ParametricArray",
["NAME:ParametricArray",
"DesignFrequency:="	, "1GHz",
"LayoutType:="		, 1,
"CenterCellX:="		, "0mm",
"CenterCellY:="		, "0mm",
"CenterCellZ:="		, "0mm",
"SpecifyDesignInWavelength:=", False,
"WidthSpacing:="	, "60mm",
"WidthSpacingInWavelength:=", "0.200138457118891",
"Width:="		, "480mm",
"WidthInWavelength:="	, "1.60110765695113",
"LengthSpacing:="	, "60mm",
"LengthSpacingInWavelength:=", "0.200138457118891",
"Length:="		, "360mm",
"LengthInWavelength:="	, "1.20083074271335",
"SymmetryType:="	, 0,
"StaggerAngle:="	, "0deg",
"StaggerType:="		, 0,
"UDirnX:="		, "0",
"UDirnY:="		, "0",
"UDirnZ:="		, "-1",
"VDirnX:="		, "1",
"VDirnY:="		, "0",
"VDirnZ:="		, "0",
"WeightType:="		, 3,
"EdgeTaperX_db:="	, "-200",
"CosineExp:="		, "1",
"DifferentialType:="	, 0,
"Behavior:="		, "UseSlaveSettings",
"ScanAnglePhi:="	, "135deg",
"ScanAngleTheta:="	, "45deg",
"UDirnPhaseShift:="	, "0deg",
"VDirnPhaseShift:="	, "0deg"]
])