Warning: The following command is preliminary. Its syntax may change. Be prepared to make changes to legacy scripts.

SetPortDeembedDistance

Sets terminal port impedance for a single port.

UI Access

From the Network Data Explorer tab, select Edit Ports in the NDE ribbon to open the Port properties window. Make changes, then click OK.
Parameters
Name Type Description
 <portNumber> Integer The port number of the changed terminal port (integers between 1 and n) .
 <distance> String Impedance with units (e.g., “20mm”); if no units, meters are assumed
Return Value

None.

 

Python Syntax SetPortDeembedDistance()
Python Example 
oNDE = oDesktop.GetTool("ndExplorer")
oPostProc.SetPortDeembedDistance(2, "20mm")