Warning: The following command is preliminary. Its syntax may change. Be prepared to make changes to legacy scripts.
Reset
Resets the post-processing to what it was when the network data was created.
Note:
This is not equivalent to setting post-processing to an empty state. The network data may have been read from a file or created from solution data that already had post-processing settings.
Resetting the oPostProcSetting object does not change any data; it only changes the settings object. If you want to change a data object to apply the changed settings, you must follow the Reset function call with oData.SetPostProcSettings(oPostProc)
| UI Access | From the Network Data Explorer tab, select Reset postprocessing in the NDE ribbon. | ||
| Parameters | None. | ||
| Return Value | None. | ||
| Python Syntax | Reset() |
| Python Example |
|