GetMeshBodiesOnLayerAndNet

Gets the field type of a driven modal design solution.

UI Access	N/A
Parameters	The inputs are a layer net block and a vector of component names (optional).
Return Value	The output is a vector of mesh body names that belong to the specified nets and layers and the component..

Python Syntax

GetMeshBodiesOnLayerAndNet()

Python Example

import ScriptEnv
ScriptEnv.Initialize("Ansoft.ElectronicsDesktop")
oDesktop.RestoreWindow()
oProject = oDesktop.SetActiveProject("Tests")
oDesign = oProject.SetActiveDesign("Reference_multiple")
oModule = oDesign.GetModule("Solutions")
meshBodies = oModule.GetMeshBodiesOnLayerAndNet(
[
"NAME:LayerNetInfo",
"METAL-1:="		, ["trace_P","ground"]
])
print meshBodies   #prints["LC1_1:METAL-1", "LC1_2:METAL-1"]
meshBodiesForLC1_1 = oModule.GetMeshBodiesOnLayerAndNet(
[
"NAME:LayerNetInfo",
"METAL-1:="		, ["trace_P","ground"]
], ["LC1_1"])
print meshBodiesForLC1_1   #prints ["LC1_1:METAL-1"]
moreMeshBodies = oModule.GetMeshBodiesOnLayerAndNet(
[
"NAME:LayerNetInfo",
"METAL-1:="		, ["trace_P","Ground"],
"METAL-2:="		, ["TRACE_p","GROUND"] #case insensitive
])
print moreMeshBodies   #prints ['LC1_1:METAL-1', 'LC1_2:METAL-1', 'LC1_1:METAL-2', 'LC1_2:METAL-2']
moreMeshBodiesForLC1_1 = oModule.GetMeshBodiesOnLayerAndNet(
[
"NAME:LayerNetInfo",
"METAL-1:="		, ["trace_P","ground"],
"METAL-2:="		, ["trace_P","ground"]
], ["LC1_1"])
print moreMeshBodiesForLC1_1   #prints['LC1_1:METAL-1', 'LC1_1:METAL-2']