ExportNCDrill (Layout Editor)

Use: Export the vias to an NC Drill file

Command: File > Export > NCDrill

Syntax: ExportNCDrill

Array("NAME:options",

"FileName:=", <"file name">,

"Units:=", <"units">,

"IntPlace:=", <integer places>,

"DecimalPlace:=", <decimal places>,

"SuppressLeadingZero:=", <suppress leading zeros>,

Array("NAME:NCDFileOptsVec",

Array("NAME:NCDrillOptions",

"Top:=", <"layer">,

"Bottom:=", <"layer">,

"Create:=", <create>), …))

Return Value: None

Parameters: <"file name">

Type: text

Description: prefix for the exported Gerber files; the actual files will be named <file name>_<page>.ger

<"units">

Type: text

Description: unit code, e.g. "in", "mm", etc.

<integer places>

Type: integer

Description: number of integer places to use when formatting the numerical output.

<decimal places>

Type: integer

Description: number of decimal places to use when formatting the numerical output.

<suppress leading zeros>

Type: boolean

Description: if true, then suppress leading zeros in the output file.

<layer>

Type: text

Description: Start/end layer names; each layer range is written to a separate NC drill file.

<create>

Type: boolean

Description: if true, create the corresponding NC drill file.