EditWavePort

Modifies a wave port.

UI Access

Double-click the excitation in the project tree to modify its settings.

Parameters

Name	Type	Description
<BoundaryName>	String	Name of the wave port to be edited.
<WavePortArray>	Array	Structured array. Array("NAME:<BoundName>", "NumModes:=", <integer>, "PolarizeEField:=",<boolean>, "DoDeembed:=", <boolean>, "DeembedDist:=", <value>, "DoRenorm:=", <boolean>, "RenormValue:=",<value>, <ModesArray>, "TerminalIDList:=", <TerminalsArray>) NumModes Number of modes for modal problems. Number of terminals for terminal problems.
<ModesArray>	Array	Structured array. Array("NAME:Modes", <OneModeArray>, <OneModeArray>, ...)
<OneModeArray>	Array	Structured array. Array("NAME:<ModeName>", "ModeNum:=", <integer>, "UseIntLine:=", <boolean>, <IntLineArray>)
<IntLineArray>	Array	Structured array. Array("NAME:IntLine", "Start:=", <LineEndPoint>, "End:=", <LineEndPoint>, "CharImp:=", <string, Characteristic impedance of the mode. Possible values are "Zpi", "Zpv", or "Zvi">)

Return Value

None.

Python Syntax

EditWavePort(<BoundaryName>, <WavePortArray>)

Python Example

oModule.EditWavePort("WavePort1", 
["NAME:WavePort1After",
"NumModes:=", 2,
"PolarizeEField:=",False,
"DoDeembed:=", True,
"DeembedDist:=", "10mil",
"DoRenorm:=", True,
"RenormValue:=","50Ohm",
["NAME:Modes",
["NAME:Mode1", 
"ModeNum:=", 1,
"UseIntLine:=", True,
["NAME:IntLine",
"Start:=", [-0.4, -1.2, 0),
"End:=", [-1.4, 0.4, 0]],
"CharImp:=", "Zpi"), 
["NAME:Mode2",
"ModeNum:=", 2,
"UseIntLine:=", False]
] 
])