EditDesignSettings

Edits design settings.

UI Access [HFSS] > Design Settings.
Parameters
Name Type Description
<overrideArray> Array

Structured array.

For HFSS design:

Array("NAME:Design Settings Data",

"Use Advanced DC Extrapolation:= <Boolean>,

"Port Validation Settings=: ["Standard" | "Extended"]

"Calculate Lossy Dielectrics:=", <Boolean>)

"Use Power S:=", <Boolean>,

"Export After Simulation:=", <boolean>, "Export Dir:=", "<path>",

"Allow Material Override:=", <boolean>,

"Calculate Lossy Dielectrics:=", <boolean>,

"EnabledObjects:=", Array(),

"Model validation Settings:=", Array("NAME:Validation Options",

"EntityCheckLevel:=", "[strict | none | warningOnly | basic ]",

"IgnoreUnclassifiedObjects:=", <boolean>,

"SkipIntersectionChecks:=", <boolean>),

"Design Validation Settings:=", "Perform full validations" )

For HFSS-IE design:

Array("NAME:Design Settings Data",

"Allow Material Override:=", <boolean>,

"Calculate Lossy Dielectrics:=", <boolean>,

"Perform Minimal validation:=", <boolean>,

"PECThreshold:=", <real>, "CondThreshold:=", <int>),

Array("NAME:Model Validation Settings", "EntityCheckLevel:=", [strict | none | warningOnly | basic ]", "IgnoreUnclassifiedObjects:=", <boolean>,

"SkipIntersectionChecks:=", <boolean>)
Return Value None.

 

Python Syntax

EditDesignSettings(<overrideArray>)
Python Example 
oDesign.EditDesignSettings(
[
"NAME:Design Settings Data",
"Use Advanced DC Extrapolation:=", True,
"Use Power S:="		, False,
"Export After Simulation:=", False,
"Allow Material Override:=", True,
"Calculate Lossy Dielectrics:=", True,
"Perform Minimal validation:=", False,
"EnabledObjects:="	, [],
"Port Validation Settings:=", "Standard"
],
[
"NAME:Model Validation Settings",
"EntityCheckLevel:="	, "Strict",
"IgnoreUnclassifiedObjects:=", False,
"SkipIntersectionChecks:=", False,
"SkipMeshChecks:=", True
])