CreateObjectCS

Creates an object coordinate system from a selected object.

UI Access

Modeler > Coordinate System > Create > Object > [Offset / Rotated / Both].

Parameters

Name	Type	Description
<Parameters>	Array	Structured array. Array("NAME:ObjectCSParameters", <OriginArray> "MoveToEnd:=" , <boolean>, "ReverseXAxis:=" , <boolean>, "ReverseYAxis:=" , <boolean>, <xAxisArray / xAxisPosArray> <yAxisArray / yAxisPosArray>) Note: xAxisArray and xAxisPosArray differ. Use xAxisArray for absolute position and xAxisPosArray for relative position. Do the same for yAxisArray and yAxisPosArray.
<OriginArray>	Array	Structured array. Array("NAME:Origin", "IsAttachedToEntity:=" , <boolean>, "EntityID:=" , <integer>, "FacetedBodyTriangleIndex:=", <integer>, "TriangleVertexIndex:=" , <integer>, "PositionType:=" , <string "OnVertex", "EdgeCenter", "FaceCenter", "OnEdge", or "AbsolutePosition">, "UParam:=" , <float between 0 and 1 representing the relative position of the point on the edge or face>, "VParam:=" , <float between 0 and 1 representing the relative position of the point on the edge or face>, "XPosition:=" , <string>, "YPosition:=" , <string>, "ZPosition:=" , <string>) IsAttachedToEntity specifies whether the point is anchored. If True, provide UParam and VParam. If False, provide XPosition, YPosition, and ZPosition to provide fixed position. Pass "0" for unused parameters.
<xAxisArray>	Array	Structured array for absolute position: Array("NAME:xAxis", "DirectionType:=" , "AbsoluteDirection", "EdgeID:=" , <integer>, "FaceID:=" , <integer>, "xDirection:=" , <string>, "yDirection:=" , <string>, "zDirection:=" , <string>, "UParam:=" , <float>, "VParam:=" , <float>)
<xAxisPosArray>	Array	Structured array for relative position: Array("NAME:xAxisPos", "IsAttachedToEntity:=" , <boolean>, "EntityID:=" , <integer>, "FacetedBodyTriangleIndex:=", <integer>, "TriangleVertexIndex:=" , <integer>, "PositionType:=" , <string "OnVertex", "EdgeCenter", "FaceCenter", or "OnEdge">, "UParam:=" , <float>, "VParam:=" , <float>, "XPosition:=" , <string>, "YPosition:=" , <string>, "ZPosition:=" , <string>)
<yAxisArray>	Array	Structured array for absolute position: Array("NAME:yAxis", "DirectionType:=" , "AbsoluteDirection", "EdgeID:=" , <integer>, "FaceID:=" , <integer>, "xDirection:=" , <string>, "yDirection:=" , <string>, "zDirection:=" , <string>, "UParam:=" , <float>, "VParam:=" , <float>)
<yAxisPosArray>	Array	Structured array for relative position: Array("NAME:yAxisPos", "IsAttachedToEntity:=" , <boolean>, "EntityID:=" , <integer>, "FacetedBodyTriangleIndex:=", <integer>, "TriangleVertexIndex:=" , <integer>, "PositionType:=" , <string "OnVertex", "EdgeCenter", "FaceCenter", or "OnEdge">, "UParam:=" , <float>, "VParam:=" , <float>, "XPosition:=" , <string>, "YPosition:=" , <string>, "ZPosition:=" , <string>)
<AttributesArray>	Array	Structured array. See: AttributesArray.

Return Value

None.

Python Syntax

CreateObjectCS(<Parameters>,<AttributesArray>)

Python Example

oEditor.CreateObjectCS(
["NAME:ObjectCSParameters",
["NAME:Origin",
"IsAttachedToEntity:="	, True,
"EntityID:="		, 59,
"FacetedBodyTriangleIndex:=", -1,
"TriangleVertexIndex:="	, -1,
"PositionType:="	, "OnVertex",
"UParam:="		, 0,
"VParam:="		, 0,
"XPosition:="		, "0",
"YPosition:="		, "0",
"ZPosition:="		, "0"
],
"MoveToEnd:="		, False,
"ReverseXAxis:="	, False,
"ReverseYAxis:="	, False,
["NAME:xAxis",
"DirectionType:="	, "AbsoluteDirection",
"EdgeID:="		, -1,
"FaceID:="		, -1,
"xDirection:="		, "1",
"yDirection:="		, "0",
"zDirection:="		, "0",
"UParam:="		, 0,
"VParam:="		, 0
],
["NAME:yAxis",
"DirectionType:="	, "AbsoluteDirection",
"EdgeID:="		, -1,
"FaceID:="		, -1,
"xDirection:="		, "0",
"yDirection:="		, "1",
"zDirection:="		, "0",
"UParam:="		, 0,
"VParam:="		, 0
]
],
["NAME:Attributes",
"Name:="		, "ObjectCS1",
"PartName:="		, "Box2"
])