AssignLumpedPort

Creates a lumped port excitation.

UI Access

HFSS > Excitations > Assign > Port > Lumped Port...

Parameters

Name	Type	Description
<LumpedPortArray>	Array	Structured array. Array("NAME:<BoundName>", "Faces:=", <FaceIDArray>, "RenormalizeAllTerminals:=", <boolean>, "DoDeembed:=", <boolean>, <ModesArray>, "ShowReporterFilter:=", <boolean>, "ReporterFilter:=", <array of boolean>, "Impedance:=" , <value>)
<ModesArray>	Array	Structured array. Array("NAME:<ModesArrayName>", <OneModeArray>, <OneModeArray>,...)
<OneModeArray>	Array	Structured array. Array("NAME:<ModeName>", "ModeNum:=", <integer>, "UseIntLine:=", <boolean>, <IntegerationLineArray>, "AlignmentGroup:=", <integer, group id>, "CharImp:=", <string, characteristic impedance>, "RenormImp:=" , <value, renormalize impedance to>)
<IntegerationLineArray>	Array	Structured array. Array("NAME:<LineName>", "Coordinate System:=", <string, relative coordinate system>, "Start:=" , <array, start location coordinates>, "End:=" , <array, end location coordinates>)

Return Value

None.

Python Syntax

AssignLumpedPort (<LumpedPortArray>)

Python Example

oModule.AssignLumpedPort(
["NAME:LumpledPort1",
"Faces:=", [9],
"DoDeembed:=", False,
"RenormalizeAllTerminals:=", True,
["NAME:Modes",
	["NAME:Mode1",
	"ModeNum:=", 1,
	"UseIntLine:=", True,
	["NAME:IntLine",
		"Coordinate System:=", "Global",
		"Start:=", ["-0.4mm","-1mm","0.8mm"],
		"End:="	, ["-0.3mm","-1.2mm","0.8mm"]
	],
	"AlignmentGroup:=", 0,
	"CharImp:=", "Zpi",
	"RenormImp:=", "50ohm"]],
"ShowReporterFilter:=", False,
"ReporterFilter:=", [True],
"Impedance:=", "50ohm"
])