AddSweep (Layout Editor)
Adds a sweep to a setup.
| UI Access | From the Project Manager window, right-click a setup and select Add Frequency Sweep. | |||||||||
| Parameters |
|
|||||||||
| Return Value | None |
| Python Syntax | oModule.AddSweep(<SetupName>, [<Parameters>]) |
| Python Example |
oModule.AddSweep("Q3D1", [ "NAME:Sweep1", [ "NAME:Properties", "Enable:=" , "true" ], [ "NAME:Sweeps", "Variable:=" , "Sweep1", "Data:=" , "LIN 10MHz 100MHz 10MHz", "OffsetF1:=" , False, "Synchronize:=" , 0 ], "GenerateSurfaceCurrent:=", False, "SaveRadFieldsOnly:=" , False, "ZoSelected:=" , False, "SAbsError:=" , 0.005, "ZoPercentError:=" , 1, "GenerateStateSpace:=" , False, "EnforcePassivity:=" , False, "PassivityTolerance:=" , 0.0001, "UseQ3DForDC:=" , False, "ResimulateDC:=" , False, "MaxSolutions:=" , 250, "InterpUseSMatrix:=" , True, "InterpUsePortImpedance:=", True, "InterpUsePropConst:=" , True, "InterpUseFullBasis:=" , True, "AdvDCExtrapolation:=" , False, "MinSolvedFreq:=" , "0.01GHz", "AutoSMatOnlySolve:=" , True, "MinFreqSMatrixOnlySolve:=", "1MHz", "CustomFrequencyString:=", "", "AllEntries:=" , False, "AllDiagEntries:=" , False, "AllOffDiagEntries:=" , False, "MagMinThreshold:=" , 0.01, "InterpMinSubranges:=" , 1, "InterpMinSolutions:=" , 0, "FreqSweepType:=" , "kDiscrete" ]) |