AddPinCustomTerminations (Schematic Editor)

Adds Custom Terminations at unconnected pins of all selected components.

UI Access Draw > Add at unconnected pins> Custom Terminations.
Parameters
Name Type Description
ComponentInstanceName <string> Instance Name of the unconnected pin that needs to be terminated.
PinName <string> Pin name of the unconnected pin.
TerminationComponentName <string> Optional parameter. Definition Name of the custom component that is being terminated at the unconnected pin.
TermName <string>

"Interface Ports"

"Page Ports"

"Grounds"

"<PinName of the termination component>"
Terminationtype <INT>

0 (Interface Port),

1 (Page Port),

2 (Ground Port),

3 (Custom Termination)
Return Value None

 

Python Syntax AddPinCustomTerminations ()
Python Example 
oEditor.AddPinCustomTerminations(
	["NAME:Connections",
		"Connection1:=", ["InstanceName:=" , "CompInst@etch_sline_s20_z70_1;1;1" , "PinName:=" , "Port1" , "TermName:=" ,  "Interface Ports" , "TermType:=", 1],
		"Connection2:=", ["InstanceName:=" , "CompInst@etch_sline_s20_z70_1;1;1" , "PinName:=", "Port3" , "TermName:=" , "Page Ports" , "TermType:=", 2],
		"Connection3:=", ["InstanceName:=" , "CompInst@etch_sline_s20_z70_1;1;1" , "PinName:=" , "Port7" , "TermComponent:=" , "test" ,	"TermName:=" , "Port1" , "TermType:=" , 4],
		"Connection4:=", ["InstanceName:=" , "CompInst@etch_sline_s20_z70_1;1;1" , "PinName:=" , "Port10","TermComponent:=" , "oneport" , "TermName:=" , "Port1" , "TermType:=" , 4]
	]