| SourceFile = STRING | Define the name and, if needed, the path of the source file, (usually a *.dynain file). |
| TargetFile = STRING | Define the name and, if needed, the path of the target file. This should be an LS-DYNA mesh. |
| MappingResult = STRING |
Define the result filename. The mapping result is written to this newly-generated file. |
|
OrientationFile = HISV Nodes |
Specifies whether orientation is stored using history variables (HISV) or should be derived from the node numbering (Nodes). |
| TransformedMeshFile = STRING |
Specify the output filename for the transformed mesh. This option is intended solely for postprocessing of the transformation. For additional details, refer to the Transformation Options section below. |
Available source and result file formats are listed below:
|
SourceFileFormat = LS-DYNA ESI-PC Nastran HDF5 ESI-HDF5 GCODE ABAQUS STEP CSV |
The source file format. LS-DYNA is the preferred format. |
| TargetFileFormat = LS-DYNA | The target file format. LS-DYNA is the only supported format |
| ResultFileFormat = LS-DYNA | The result file format. LS-DYNA is the only supported format |