| SourceFile = STRING | Defines the source file's name. If needed, also defines either the undeformed mesh file's path that has reinforcing patch EIDs, or the deformed target mesh file's path. Refer to the BYPASS UNFOLDED option to define the correct mesh file. If REVERSE DRAPING=NO is defined, the source and target file must be the same mesh file. |
| TargetFile = STRING |
Defines the target file's name. If needed and REVERSE DRAPING = NO is defined, also defines either the undeformed target file's path or deformed target mesh file. The mesh must be an LS-DYNA mesh. |
| MappingResult = STRING | Defines the result file's name. The mapping result is written to this generated file. |
| FoldedSourceFile = STRING | Defines the folded (deformed) mesh file's name, which is used in an optimization simulation to generate reinforcing patches. If REVERSE DRAPING = NO is defined, then the folded source file is not required. |
| TransformedMeshFile = STRING | Defines the transformed mesh's file name. This option is for the transformation's post-processing only. For further information, see the Transformation Options below. |