This section describes the options available for the mapping of material properties for *MAT 4A MICROMEC (*MAT 215). The initial input is the same as above, with minor changes to the target options and additional cards specific to the initialization of material properties for (*MAT_215) with the *INITIAL_STRESS_SOLID card.
| TargetMaterialModel = 215 | Define the ID of the target material model corresponding to [20]. Here, it must be 215. |
| MapStress = YES | Define whether *INITIAL_STRESS_SOLID cards are written. If data must be made available for the *MAT_215 material model via *INITIAL_STRESS_SOLID cards, this option must be YES. |
| MapMainDir = NO |
Activate mapping of main directions to *ELEMENT_SOLID_ORTHO cards. For usage with *MAT_215, this option is NO. |