| SourceFile = STRING | Define the name and, if needed, the path of the source file. This
should be the Moldex3D mesh, translated into LS-DYNA format. |
| TargetFile = STRING | Define the name and, if needed, the path of the target file. This
should be an LS-DYNA mesh. If source and target file name are identical,
mapping routines are skipped and the hardening parameter is initialized
directy. |
| MappingResult = STRING | Define the result filename. The mapping result is written to this
newly generated file. |
| OrientationFile = STRING | Moldex3D-o2d files containing the fiber orientation tensor are
considered. |
| WeldlineFile = STRING | If weldlines should be considered, the .nwd
weldline-file that contains nodes and respective main angles can be
defined here. With the MapWeldline flag, weldline consideration is
activated and a different part is assigned to weldline elements. You can
define corresponding material parameters for these parts. |
| TransformedMeshFile =
STRING | Specify the output filename for the transformed mesh. This option is
intended solely for postprocessing of the transformation. For additional
details, refer to the Transformation Options section
below. |
