| SourceFile = STRING | Define the name and, if needed, the path of the source file. This
must be a Moldex3D mesh that is translated into LS-DYNA format. |
| TargetFile = STRING | Define the name and, if needed, the path of the target file. This
must be an LS-DYNA mesh. |
| MappingResult = STRING | Define the result file name. The mapping result is written into this
newly generated file. |
| OrientationFile = STRING | Moldex3D - o2d files containing the fiber orientation tensor are
considered. |
| InitialStressFile = STRING | Moldex3D - so2d files containing resulting stresses from Moldex3D
simulation. If this option is active, stresses are also mapped. |
| WeldlineFile = STRING | If weldlines are considered, define the .nwd
weldline-file which contains nodes and respective main angles with this
option. With the MapWeldline flag,
weldline consideration is activated, and a different part is assigned to
weldline elements. You can define corresponding material parameters for
these parts. |
| TransformedMeshFile =
STRING | Specify the file name where the transformed mesh is written. This
option is intended solely for postprocessing of the transformation. For
additional details, refer to the Transformation Options section
below. |
