| SourceFile = STRING | Define the name and, if needed, the path of the source file (usually a *.dynain file). |
| TargetFile = STRING | Define the name and, if needed, the path of the target file. The target file must be an LS-DYNA application mesh. |
| MappingResult = STRING | Define the result file name. The mapping result is written into this newly generated file. |
| OrientationFile = HISV | To enable the transfer of orientations, define this flag. It informs the program that the orientation data is stored within the history variables (HISV). Alternatively, orientations can be derived from the element nodes. This method may yield accurate results if the mesh is well-aligned initially. |
| TransformedMeshFile = STRING | Specify the file name where the transformed mesh is written. This option is intended solely for postprocessing of the transformation. For additional details, refer to the Transformation Options section below. |
The following are available source and result file formats:
|
SourceFileFormat = LS−DYNA ESI−PC Nastran HDF5 ESI−HDF5 GCODE ABAQUS STEP CSV | The source file format. The preferred format is LS-DYNA. |
| TargetFileFormat = LS−DYNA | The target file format. The only format available is LS-DYNA. |
| ResultFileFormat = LS−DYNA | The result file format. The only format available is LS-DYNA. |