| SourceFile = STRING | Define the name and, if needed, the path of the source file (usually a *.dynain file). |
| TargetFile = STRING | Define the name and, if needed, the path of the target file. The target file must be an LS-DYNA application mesh. |
| MappingResult = STRING | Define the result file name. The mapping result is written into this newly generated file. |
|
OrientationFile = HISV Nodes | To enable the transfer of orientations, define this flag. It informs the program that the orientation data is stored within the history variables (HISV). Alternatively, you have the option of deriving the orientations from the element nodes. This method may yield accurate results if the mesh is well-aligned initially. |
| TransformedMeshFile = STRING | Specify the file name where the transformed mesh is written. This option is intended solely for postprocessing of the transformation. For additional details, refer to the Transformation Options section below. |
| AddEleHISVFile# = STRING | A file name carrying element histories in an additional file. Multiple of these files can be defined. The first 10 digits of the lines must hold the element ID, the following 10 digits carry some arbitrary value, interpreted as an additional history variable on the element level. |
| LookupTable# = STRING | A file name carrying lookup tables. Values within one line are separated by a space. As described in the Equation Parser section, the Envyo application enables history variable lookup based on these looktables provided by you. Following the lookup table command, you must define the columns that are considered for variable lookup. See the example in the Equation Parser section. |
The following options are available for the source, target, and result file formats:
|
SourceFileFormat = LS-DYNA ESI-PC Nastran HDF5 ESI-HDF5 GCODE ABAQUS STEP CSV | The source file format. The preferred format is LS-DYNA. |
| TargetFileFormat = LS-DYNA | The target file format. The only format available is LS-DYNA. |
| ResultFileFormat = LS-DYNA | The result file format. The only format available is LS-DYNA. |