| SourceFile = STRING | Define the name and, if needed, the path of the source file (usually a *.dynain file). |
| TargetFile = STRING | Define the name and, if needed, the path of the target file. The target file should be an LS-DYNA application mesh. |
| MappingResult = STRING | Define the result file name. The mapping result will be written into this newly generated file. |
|
OrientationFile = HISV Nodes | To enable the transfer of orientations, define this flag. It informs the program that the orientation data is stored within the history variables (HISV). Alternatively, orientations can be derived from the element nodes. This method may yield accurate results if the mesh was well-aligned initially. |
There are some options available for source and result file formats:
|
SourceFileFormat = LS-DYNA ESI-PC Nastran HDF5 ESI−HDF5 GCODE ABAQUS STEP CSV | The source file format. The preferred format is LS-DYNA. |
| TargetFileFormat = LS−DYNA | The target file format. The only format available is LS-DYNA. |
| ResultFileFormat = LS−DYNA | The result file format. The only format available is LS-DYNA. |