| SourceFile = STRING | Defines the name and, if needed, the path of the source file (usually
a *.dynain file). |
| TargetFile = STRING | Defines the name and, if needed, the path of the target file. The target file must be an LS-DYNA application mesh. |
| MappingResult = STRING | Defines the result file name. The mapping result is written into this newly generated file. |
|
OrientationFile = HISV Nodes | To enable the transfer of orientations, define this flag. It informs the program that the orientation data is stored within the history variables (HISV). Alternatively, orientations can be derived from the element nodes. This method may yield accurate results if the mesh was well-aligned initially. |
| TransformedMeshFile = STRING | Specifies the file name where the transformed mesh is written. This option is intended solely for postprocessing of the transformation. For additional details, refer to the Transformation Options section below. |
The following are available source and result file formats:
| SourceFileFormat = LS − DYNA |
The source file format. The only format available is LS-DYNA. |
| TargetFileFormat = LS − DYNA |
The target file format. The only format available is LS-DYNA. |
| ResultFileFormat = LS − DYNA |
The result file format. The only format available is LS-DYNA. |