Member

AddPrescribedPoints

An AddPrescribedPoints control type sets the the prescribed points for the volume mesh.

Member

AddPrescribedPointsFromFile

An AddPrescribedPointsFromFile control type sets the prescribed points for the volume mesh using an external input file.

Member

AdvancedScopeMorphing

An AdvancedScopeMorphing control type sets the advanced morphing scope attributes to set automatically the region of morphing.

Member

AdvancedSolverMorphing

An AdvancedSolverMorphing control type sets the advanced morphing solver attributes for any morphing operation.

Member

AutoRepair

An AutoRepair control type sets the attributes to execute a preordered set of repair controls to be applied to scoped topology dependent on selections of desired options.

Member

Checkpoint

A Checkpoint control type sets properties that are required for creating a checkpoint consisting of all data required to restore the actual state of the Step.

Member

ConstantSizeMultiZoneSurfaceMesher

A ConstantSizeMultiZoneSurfaceMesher control type sets the properties that are required for creating a surface mesh using a constant element size.

Member

ConstantSizeMultiZoneVolumeMesher

A ConstantSizeMultiZoneVolumeMesher control type sets the properties that are required for creating a volume mesh using a constant element size.

Member

ConstantSizeSurfaceMesh

A ConstantSizeSurfaceMesh control type sets the properties that are required for creating constant size surface meshes according to the parameters given. The important parameters are element size and type.

Member

ConstantSizeVolumeMesh

A ConstantSizeVolumeMesh control type sets the properties that are required for creating volume meshes according to the given parameters.

Member

ConstantSizeWrap

A ConstantSizeWrap control type sets the properties that are required for creating a closed surface around or inside a specified scope of the mesh, i.e. it allows to wrap regions of the mesh using a constant mesh size.

Member

CuboidalEnclosure

A CuboidalEnclosure control type sets properties that are required for creating a cuboidal enclosure around a specified scope.

Member

CustomNamesEnclosure

A CustomNamesEnclosure control type sets the names to be used for the zones and labels being created in a CreateEnclosure operation.

Member

CustomNamesExtrusion

A CustomNamesExtrusion control type specifies the names to be used for the zones and labels being created in a Extrude operation.

Member

CustomNamesWrap

A CustomNamesWrap control type sets the names to be used for the zones and labels being created by a Wrap operation.

Member

CylindricalScalingMorphing

A CylindricalScalingMorphing control sets the attributes for a cylindrical scaling morphing.

Member

Delete

A Delete control type sets the scope of the model to delete.

Member

EdgeBiasingMultiZoneMesher

An EdgeBiasingMultiZoneMesher control type sets the properties that are required for defining edge biasing parameters of the output MultiZone mesh.

Member

EdgesOfFacesRepair

An EdgesOfFacesRepair control type sets the attributes to prevent the collapse and defeature of thin or short topologies, and allow the creation of a coarse mesh while keeping topology as-is.

Member

EdgeSuppression

An EdgeSuppression control type sets the attributes to suppress the selected edges.

Member

Extrusion

An Extrusion control type sets the properties that are required for extruding the specified surface mesh layer-by-layer in a specific direction defined by the local surface normals.

Member

FaceMerging

A FaceMerging control type sets the attributes to merge faces such that edges between faces don't affect mesh generation.

Member

FacePinching

A FacePinching control type sets the attributes to remove small features from topology to improve mesh quality.

Member

HemisphereEnclosure

A HemisphereEnclosure control type sets properties that are required for creating a hemispherical enclosure around a specified scope.

Member

HoleFilling

A HoleFilling control type sets the properties that are required for closing holes in surface meshes by creating patch. The inputs are the edge closed loops delimiting the holes.

Member

HolePatching

A HolePatching control type sets the properties that are required for closing holes in surface meshes by creating patch surfaces. The inputs are the Material Points to Include and to Exclude from the closed volume region.

Member

ImproveSurfaceMeshProjectionOnGeometry

An ImproveSurfaceMeshProjectionOnGeometry control type sets the properties that are required for projecting the nodes of the input scope on the underlying geometry.

Member

ImproveSurfaceMeshQuadsToTrianglesSplitting

An ImproveSurfaceMeshQuadsToTrianglesSplitting control type sets the properties that are required for splitting the quadrilaterals of the input scope to triangles.

Member

ImproveSurfaceMeshSecondOrderConversion

An ImproveSurfaceMeshSecondOrderConversion control type allows the user to set properties that are required for converting linear surface mesh elements to 2nd order elements.

Member

ImproveVolumeMeshAutoNodeMove

An ImproveVolumeMeshAutoNodeMove control type sets the properties that are required for improving volume meshes according to the auto-node-move criteria given.

Member

ImproveVolumeMeshSecondOrderConversion

An ImproveVolumeMeshSecondOrderConversion control type sets the properties that are required for converting linear volume mesh elements to 2nd order elements.

Member

InteriorEdgeSuppression

An InteriorEdgeSuppression control type sets the attributes to suppress interior edges of scoped faces.

Member

InteriorVertexDeletion

An InteriorVertexDeletion control type sets the attributes to delete interior vertices from scoped topology.

Member

IrregularShapeConvexEnclosure

An IrregularShapeConvexEnclosure control sets properties that are required for creating a convex irregular enclosure around a specified scope.

Member

IrregularShapeHemiConvexEnclosure

An IrregularShapeHemiConvexEnclosure control type sets properties that are required for creating a convex irregular enclosure with a cut plane around a specified scope.

Member

LabelAdditionByProximity

A Label Addition control type which defines the entities to be labeled by a proximity search. Previously called LabelCreationByProximity.

Member

LabelAdditionByScope

A Label Addition control type which defines the entities to be labeled by scope evaluation. Previously called LabelCreationByScope.

Member

MappedMeshingMultiZoneMesher

A MappedMeshingMultiZoneMesher control type sets the properties that are required for defining mapped meshing parameters of the output MultiZone mesh.

Member

MaterialPoint

A MaterialPoint control type sets the properties that are required for defining a material point location and type.

Member

MergeNodes

A MergeNodes control type sets the scope and tolerance for the node merging operation.

Member

MeshExport

A MeshExport control type sets properties that are required for exporting the actual mesh data to a file.

Member

MeshImport

A MeshImport control type sets properties that are required for importing mesh data from a file.

Member

MeshReplication

A MeshReplication control type sets the attributes to define parameters to replicate mesh.

Member

NumberOfDivisionsOnEdges

A NumberOfDivisionsOnEdges control type to specify the number of edge divisions while meshing.

Member

OffsetMorphing

An OffsetMorphing control type sets the attributes for an offset morphing.

Member

PartEnclosure

A PartEnclosure control type sets properties that are required for creating a user-defined enclosure around a specified scope.

Member

PartialDefeature

A PartialDefeature control type sets the attributes to partially remove thin faces and sharp angles within provided tolerances, such that only topology impacting mesh quality is removed.

Member

PartsMerging

A PartsMerging control type sets the properties that are required for combining multiple parts into one.

Member

QuadBoundaryLayer

A QuadBoundaryLayer control type sets the properties that are required for creating quadratic boundary layers.

Member

QuadMeshAdvancedOptions

A QuadMeshAdvancedOptions control type sets the advanced properties to be used for creating surface meshes.

Member

RecordingMorphing

A RecordingMorphing control type sets the name of the morphing recording to use.

Member

RotationMorphing

A RotationMorphing control type sets the attributes for a rotational morphing.

Member

ScalingExtrusion

A ScalingExtrusion control type sets the properties that are required for extruding the specified surface mesh layer-by-layer in a specific direction defined by a spherical scaling.

Member

SetSOLSH190

A SetSOLSH190 control type sets the scope to which the SOLSH190 attribute is applied.

Member

SharpAngleFaceRemoval

A SharpAngleFaceRemoval control type sets the attributes to remove sharp angle faces below the specified angle tolerance by merging them to the neighboring faces.

Member

ShortEdgeCollapse

A ShortEdgeCollapse control type sets the attributes to collapse edges below the specified tolerance. Feature edges and Protected edges are not collapsed.

Member

SizeFieldMultiZoneSurfaceMesher

A SizeFieldMultiZoneSurfaceMesher control type sets the properties that are required for creating a surface mesh using a size field based sizing.

Member

SizeFieldMultiZoneVolumeMesher

A SizeFieldMultiZoneVolumeMesher control type sets the properties that are required for creating a volume mesh using a size field based sizing.

Member

SizeFieldWrap

A SizeFieldWrap control type sets the properties that are required for creating a closed surface around or inside a specified scope of the mesh based on a size field, i.e. it allows to wrap regions of the mesh using a constant mesh size.

Member

SolderBallCreation

A CreateSolderBall control type to define solder ball parameters and mesh settings.

Member

SphericalEnclosure

A SphericalEnclosure control type sets properties that are required for creating a spherical enclosure around a specified scope.

Member

SphericalScalingMorphing

A SphericalScalingMorphing control type sets the attributes for a spherical scaling morphing.

Member

StackableBodiesDetection

A StackableBodiesDetection control type sets the attributes to define parameters for detect stackable bodies operation.

Member

StackerDiagnostics

A StackerDiagnostics control type sets the attributes to define parameters to diagnose the input.

Member

StackerVolumeFlattening

A StackerVolumeFlattening control type sets the attributes to flatten the input faces to a stackable base face.

Member

StackerVolumeMeshing

A StackerVolumeMeshing control type sets the attributes to stack the base face and create a three dimensional volume mesh.

Member

SurfaceDiagnostics

A SurfaceDiagnostics control type sets the scope to check for surface mesh issues.

Member

ThinFaceRemoval

A ThinFaceRemoval control type sets the attributes to remove thin faces by merging them with the neighboring faces.

Member

TopologyCreation

A TopologyCreation control type sets the properties that are required for converting a mesh-based part into a part with a topology representation.

Member

TopologyDeletion

A TopologyDeletion control type sets the properties that are required for deleting the topology from parts with mesh and topology representation.

Member

TopologyDiagnostics

A TopologyDiagnostics control type sets the scope to check for topological issues.

Member

TopologyProtection

A TopologyProtection control type sets the attributes to prevent repair controls being applied to scoped topology.

Member

TopologyProtectionMultiZoneMesher

A TopologyProtectionMultiZoneMesher control type sets the properties that are required for defining the protected topology for MultiZone mesh generation.

Member

TranslationMorphing

A TranslationMorphing control type sets the attributes for a translation morphing.

Member

UserNamesSolderBall

A UserNamesSolderBall control type sets custom names for the volumes and faces generated by the CreateSolderBall operation.

Member

UserNamesStackableBodiesDetection

A UserNamesStackableBodiesDetection control type sets the attributes to label the stackable bodies created during DetectStackableBodies operation.

Member

UserNamesStackerVolumeFlattening

A UserNamesStackerVolumeFlattening control type sets the attributes to label the base face created during flatten volume operation.

Member

UserNamesSurfaceDiagnostics

A UserNamesSurfaceDiagnostics control type sets custom names for the scopes defined when diagnosing surface mesh issues with the SurfaceDiagnostics control. These scopes identify regions of the input scope with mesh issues.

Member

UserNamesTopologyDiagnostics

A UserNamesTopologyDiagnostics control type sets custom names for the scopes defined when diagnosing topological issues with the TopologyDiagnostics control. These scopes identify regions of the input scope with topological issues.

Member

UserNamesVolumetricSizeField

A UserNamesVolumetricSizeField control type sets the name of the volumetric size field to create.

Member

VolumesMerging

A VolumesMerging control type sets the properties that are required for combining multiple volume zones into one.

Member

VolumetricSizeFieldBOI

A VolumetricSizeFieldBOI control type sets the attributes for the creation of a volumetric size field defined by the distance from a body of influence.

Member

VolumetricSizeFieldCurvature

A VolumetricSizeFieldCurvature control type sets the attributes for the creation of a volumetric size field defined by the curvature based on the input geometry.

Member

VolumetricSizeFieldLoad

A VolumetricSizeFieldLoad control type sets the file to load for the volumetric size field.

Member

VolumetricSizeFieldMaxSize

A VolumetricSizeFieldMaxSize control type sets the attributes for the creation of a volumetric size field defined by a maximal size.

Member

VolumetricSizeFieldProximity

A VolumetricSizeFieldProximity control type sets the attributes for the creation of a volumetric size field defined by the proximity to the input geometry.

Member

WrapSpecificSurfaceMesh

A WrapSpecificSurfaceMesh control type sets the properties that are required for creating wrapper specific surface meshes according to the given parameters.

Member

ZoneMaterialAssignment

A ZoneMaterialAssignment control type sets the material to be assigned to zones. Upon completion of the workflow the assigned material will be propagated to the new geometry part(s) and bodies being created.

Member

ZoneThicknessAssignment

A ZoneThicknessAssignment control type sets the thickness to be assigned to zones. Upon completion of the workflow the assigned thickness will be propagated to the new geometry surface part(s) being created.