Topo Edges Of Topo Faces Repair control allows you to perform basic repair, prepares the input geometry to ensure successful mesh generation and avoid collapsing or defeaturing thin or short edges.
Topo Edges Of Topo Faces Repair Details view has the following options:
General
Control Type: Displays the selected control type.
Scope
Define By: Allows you to define the input to the selected control. The available options are Value and Outcome.
Value: Allows you to manually set the value of the Scoping Method and Scoping Pattern.
Outcome: Allows you to select the existing scoped outcomes from the previous steps as input.
Scoping Method: Allows you to select the entities for the selected control. The available options are:
Part: Allows you to select parts for defining the scope of the control.
Label: Allows you to select labels for defining the scope of the control.
Zone: Allows you to select zones for defining the scope of the control.
Scoping Pattern: Allows you to specify the name pattern to get the selected Scoping Method. Scoping Pattern supports Regular Expression. You can click
on the right corner of the option and the
following options are available:Publish: Publishes Scoping Pattern to the Property Worksheet.
Scope All: Inserts '.*' regular expression to scope all entities.
Definition
Repair Tolerance: Allows you to repair and collapse the smallest edges of faces. The default value for the Repair Tolerance is 0.0 mm. You can click
on the right corner of the
option and click Publish to publish Repair
Tolerance to the Property Worksheet. You can
parametrize Repair Tolerance.