Reevaluate

The Reevaluate system is a parametric system that collects all available designs with the help of design directories and a monitoring database file. All nodes within the system (for example, integration nodes as solver) should be executed in read mode if available.

Reevaluation Settings

To access the options shown in the following table, double-click the Reevaluate system on the Scenery pane and switch to the Reevaluation settings tab.

OptionDescription
Path to design directoriesBrowse for the corresponding design directories.
Design directory format

Modifies the design directory format. Default format is Design%04d. Any format containing a placeholder for integer numbers is valid. Integers are represented by %d, %i, %x or %o. For multiple numbers, use %1%. Some examples are:

  • Design%04d finds Design0001 or Design0112

  • Design%1%/dp%1% finds Design1/dp1 or Design223/dp223

Design numbersDefines the range of design numbers using all, [, -, ] or ;. By default, all found design directories within the selected path are set. The design numbers do not have to be consecutive, for example [1-3];5;[7-10]. Leaving this line empty means using all designs.
Merge dataSelecting this check box displays the following options.

  • Path to monitoring database

    Browse for the corresponding optiSLang monitoring database files.

  • Merge input data

    If parameters were removed from the system and Merge input data is selected, the removed parameter values are merged back from the monitoring database file into the design table. If Merge input data is cleared, these values do not appear in the design table.

  • Merge output data

    If responses or criteria were added to the system, result designs always display them. If items were removed from the system and Merge output data is selected, the result values of removed items are merged back from the monitoring database file into the result design table. If Merge output data is cleared, these values do not appear in the design table.

Type of postprocessingSets the type of resulting sampling monitoring database file.
Adapt boundsWhen selected, the bounds of the parameters are set to the minimum and maximum values of the sampling for Sensitivity monitoring database files.
Write optiSLang post-processor database fileSelect how often the post-processor database file is written.
Show as soon as availableWhen selected, show postprocessing during the run as soon as it is available or after a certain number of designs.
Show on terminationWhen selected, the postprocessing opens after the algorithm terminates. An additional Postprocessing node is not required.
Register filesWhen selected, defines file filter rules. Any file matching the defined filters is registered.

  • Images: Defines a filter for common image formats such as *.bmp, *.gif, *.ico, *.jpeg, *.png and so on.

  • Ansys Viewer files: Defines a filter for Ansys Viewer .avz files..

  • VCollab CAX/wCAX files: Defines a filter for the visualization file formats of the VCollab software.

  • Custom: Opens a dialog, allowing you to create custom filter settings.

Additional Options

This algorithm allows Additional Options.