[1] Digitaler Prototyp DigitPro. Arena2036. 2017.

[2] Der digitale Prototyp - Ganzheitlicher digitaler Prototyp im Leichtbau fuer die Grossserienproduktion. Springer Vieweg. 2019.

[3] HDFView. HDF Group. 2021.

[4] History Variables for Certain Material Models. LS-DYNA Support. 2021.

[5] C. Amann, S. Kreissl, H. Krass, J. Meinhardt, C. Liebold, and P. M. Merklein. Beruecksichtigung der umformbedingten Reorientierung bei der Verzugssimulation von CFK-Bauteilen. LS-DYNA Forum. Vol. 14. Bamberg, GER: 2021.

[6] B. Amos and V. Garcia. Cparse. GitHub. 2020.

[7] R. Bay. Fiber Orientation in Injection-Molded Composites: A Comparison of Theory and Experiment. PhD Thesis. University of Illinois, USA. 1991.

[8] J. Dittmann, P. Boehler, D. Michaelis, M. Vinot, C. Liebold, F. Fritz, H. Finckh, and P. Middendorf. DigitPro - Digital Prototype Build-up Using the Example of a Braided Structure. International MERGE Technologies Conference for Lightweight Structures. Chemnitz, GER: 2015.

[9] J. Gahm. Microstructural feature-based Processing and Analysis of Diffusion Tensor MRI. PhD Thesis. University of California, USA. 2014.

[10] S. Hartmann, C. Liebold, and A. Erhart. Introduction to short fiber reinforced composite modeling with LS-DYNA. Technical Report. DYNAmore GmbH. May 2017.

[11] R. Jennrich, M. Roth, S. Kolling, and C. Liebold. Experimental and Numerical Analysis of a Glass Fiber Reinforced Plastic. LS-DYNA User's Forum. Vol. 13. Bamberg, GER: October 2014.

[12] J. S. Cintra and C. L. III Tucker. Orthotropic closure approximations for flow‐induced fiber orientation. Journal of Rheology. Vol. 39. 1096-1122. 1995.

[13] D. Koch, A. Haufe, C. Wilking, C. Liebold, M. Feucht, and S. Roller. Challenges in the simulative consideration of the aluminium hadening induced by the KTL furnace. 16th International LD-DYNA Users Conference. 2020.

[14] S. Kreissl, T. Senner, A. Lipp, and J. Meinhardt. Industrial Forming Simulation of Multi-Layered UD Non-Crimp-Fabrics. LS-DYNA Forum. Vol. 13. Bamberg, GER: 2014.

[15] B. Lauterbach, M Erzgraeber, C. Liebold, M. Helbig, and A. Haufe. Closed Simulation Process Chain for Short Fiber Reinforced Plastic Components with LS-DYNA. LSDYNA User’s Forum. Vol. 14. Bamberg, GER: October 2016.

[16] C. Liebold and A. Erhart. Recent Enhancements on Short-Fiber Reinforced Plastics Modeling in LS-DYNA. European LS-DYNA Conference. Vol. 10. Wuerzburg, GER: 2015.

[17] C. Liebold and M. Vinot. Utilizing the Digital Prototype for a Closed Simulation Process Chain and Data Management. Stuttgarter Symposium (FKFS). Vol. 17. Stuttgart, GER: 2017.

[18] C. Liebold and M. Vinot. Moeglichkeiten zur Beruecksichtigung von Warmauslagerungseffekten bei Aluminiumbauteilen in der Finite-Elemente-Simulation. NAFEMS DACH Conference. 2020.

[19] Livermore Software Technology Corporation (LSTC). LS-DYNA User’s Manual. Vol. 1. Livermore, CA, USA: September 2014.

[20] Livermore Software Technology Corporation (LSTC). LS-DYNA User’s Manual. Vol. 2. Livermore, CA, USA: September 2014.

[21] P. Reithofer, A. Fertschej, B. Hirschmann, B. Jilka, A. Erhart, and S. Hartmann. *MAT 4A MICROMEC - Theory and Application notes. 15th International LS-DYNA Users Conference. Detroit, MI, USA: 2018.

[22] D. Shepard. A two-dimensional interpolation function for irregularly-spaced data. Proceeding ACM National Conference. 1968.

[23] M. Vinot. Output of rves - documentation for envyo - implementation. Technical report. German Aerospace Center - DLR. July 2017.

[24] K. Wolf, U. Scholl, P. Post, J. V. Peetz, M. Ottavio, T. Wallmersperger, M. Waedt, and B. Kroeplin. Verbesserung der Prognosefaehigkeit der Crashsimulation aus hoeherfesten Mehrphasenstaehlen durch Beruecksichtigung von Ergebnissen vorangestellter Umformsimulationen. Technical Report FAT Schriftenreihe 198, Forschungsreihe Automobiltechnik e.V.,. Frankfurt, GER: May 2005.