/Collapse all
- TALLOW - Defines the temperature table for safety factor calculations.
- TARGET - Specifies the target nodes for mapping pressures onto surface effect elements.
- *TAXIS - Defines table index numbers.
- TB - Activates a data table for linear and nonlinear material properties or special element input.
- TBCOPY - Copies a data table from one material to another.
- TBDATA - Defines data for the material data table.
- TBDELE - Deletes previously defined material data tables.
- TBEO - Sets special options or parameters for material data tables.
- TBIN - Sets parameters used for interpolation of the material data tables.
- TBFIELD - Defines values of field variables for material data tables.
- TBFPLOT - Plots material curve-fitting data.
- TBFT - Performs material curve-fitting operations.
- TBLE - Specifies "Data table properties" as the subsequent status topic.
- TBLIST - Lists the material data tables.
- TBMODIF - Modifies data for the material data table (GUI).
- TBPLOT - Displays the material data table.
- TBPT - Defines a point on a nonlinear data curve.
- TBTEMP - Defines a temperature for a material data table.
- TCHG - Converts 20-node degenerate tetrahedral elements to their 10-node non-degenerate counterparts.
- /TEE - Writes a list of commands to a specified file at the same time that the commands are being executed.
- THEXPAND - Enables or disables thermal loading
- THOPT - Specifies nonlinear transient thermal solution options.
- TIFF - Provides TIFF file export for Mechanical APDL displays.
- TIME - Sets the time for a load step.
- TIMERANGE - Specifies the time range for which data are to be stored.
- TIMINT - Turns on transient effects.
- TIMP - Improves the quality of tetrahedral elements that are not associated with a volume.
- TINTP - Defines transient integration parameters.
- /TITLE - Defines a main title.
- /TLABEL - Creates annotation text (GUI).
- TOFFST - Specifies the temperature offset from absolute zero to zero.
- *TOPER - Operates on table parameters.
- TORUS - Creates a toroidal volume.
- TRANSFER - Transfers a pattern of nodes to another coordinate system.
- *TREAD - Reads data from an external file into a table array parameter.
- TREF - Defines the reference temperature for thermal strain calculations.
- /TRIAD - Shows the global XYZ coordinate triad on displays.
- /TRLCY - Specifies the level of translucency.
- TRNOPT - Specifies transient analysis options.
- TRPDEL - Deletes charged particle trace points.
- TRPLIS - Lists charged particle trace points.
- TRPOIN - Defines a point through which a charged particle trace will travel.
- TRTIME - Defines the options used for the PLTRAC (charged particle trace) command.
- TSHAPE - Defines simple 2D and 3D geometric surfaces for target segment elements.
- /TSPEC - Creates annotation text attributes (GUI).
- TSRES - Defines an array of key times at which the time-stepping strategy changes.
- TUNIF - Assigns a uniform temperature to all nodes.
- TVAR - Changes time to the cumulative iteration number.
- /TXTRE - Controls application of texture to selected items.
- /TYPE - Defines the type of display.
- TYPE - Sets the element type attribute pointer.