/Collapse all
- M - Defines master degrees of freedom (MDOFs) for superelement generation analyses.
- MACOPT - Specifies modal assurance criterion (MAC) or frequency response function (FRF) correlation criteria calculation options for RSTMAC.
- MAGOPT - Specifies options for a 3D magnetostatic field analysis.
- MAGSOLV - Specifies magnetic solution options and initiates the solution.
- MAP - Maps pressures from source points to target surface elements.
- /MAP - Enters the mapping processor.
- MAP2DTO3D - Initiates a 2D to 3D analysis and maps variables.
- MAPSOLVE - Maps solved node and element solutions from an original mesh to a new mesh.
- MAPVAR - Defines tensors and vectors in user-defined state variables for rezoning and in 2D to 3D analyses.
- MASCALE - Activates scaling of the entire system matrix.
- MASTER - Specifies "Master DOF" as the subsequent status topic.
- MAT - Sets the element material attribute pointer.
- MATER - Specifies "Material properties" as the subsequent status topic.
- MAXCYCMODE - Computes the maximum results value of cyclic mode pairs at the same frequency or the amplitude of a single complex mode.
- MCHECK - Checks mesh connectivity.
- MCFOPT - Specifies options for the Modal Coordinates File (Jobname.mcf).
- MDAMP - Defines the damping ratios as a function of mode.
- MDELE - Deletes master degrees of freedom.
- MDPLOT - Plots frequency-dependent modal damping coefficients calculated by DMPEXT.
- MEMM - Allows the current session to keep allocated memory
- /MENU - Activates the Graphical User Interface (GUI).
- *MERGE - Merges two dense matrices or vectors into one.
- MESHING - Specifies "Meshing" as the subsequent status topic.
- *MFOURI - Calculates the coefficients for, or evaluates, a Fourier series.
- *MFUN - Copies or transposes an array parameter matrix.
- MGEN - Generates additional MDOF from a previously defined set.
- MIDTOL - Sets midstep residual criterion values for structural transient analyses.
- /MKDIR - Creates a directory.
- MLIST - Lists the MDOF of freedom.
- MMASS - Specifies the missing mass response calculation.
- MMF - Calculates the magnetomotive force along a path.
- MODCONT - Specify additional modal analysis options.
- MODDIR - Enables remote read-only usage of modal analysis files or substructuring analysis files.
- MODE - Specifies the harmonic loading term for this load step.
- MODIFY - Changes the listed values of the data in a set.
- MODMSH - Controls the relationship of the solid model and the FE model.
- MODSELOPTION - Specifies the criteria for selecting the modes to be expanded.
- MODOPT - Specifies modal analysis options.
- MONITOR - Controls contents of variable fields in the nonlinear solution monitor file.
- *MOPER - Performs matrix operations on array parameter matrices.
- MOPT - Specifies meshing options.
- MORPH - Specifies morphing and remeshing controls.
- MOVE - Calculates and moves a node to an intersection.
- MP - Defines a linear material property as a constant or a function of temperature.
- MPAMOD - Modifies temperature-dependent secant coefficients of thermal expansion.
- MPCHG - Changes the material number attribute of an element.
- MPCOPY - Copies linear material model data from one material reference number to another.
- MPDATA - Defines property data to be associated with the temperature table.
- MPDELE - Deletes linear material properties.
- MPDRES - Reassembles existing material data with the temperature table.
- /MPLIB - Sets the default material library read and write paths.
- MPLIST - Lists linear material properties.
- MPPLOT - Plots linear material properties as a function of temperature.
- MPREAD - Reads a file containing material properties.
- MPRINT - Specifies that radiation matrices are to be printed.
- MPTEMP - Defines a temperature table for material properties.
- MPTGEN - Adds temperatures to the temperature table by generation.
- MPTRES - Restores a temperature table previously defined.
- MPWRITE - Writes linear material properties in the database to a file (if the LIB option is not specified) or writes both linear and nonlinear material properties (if LIB is specified) from the database to a file.
- /MREP - Enables you to reissue the graphics command macro "name" during a replot or zoom operation.
- MRPM - Defines the revolutions per minute (RPM) for a machine rotation.
- *MSG - Writes an output message via the Mechanical APDL message subroutine.
- MSHAPE - For elements that support multiple shapes, specifies the element shape to be used for meshing.
- MSHCOPY - Simplifies the generation of meshes that have matching node element patterns on two different line groups (in 2D) or area groups (3D).
- MSHKEY - Specifies whether free meshing or mapped meshing should be used to mesh a model.
- MSHMID - Specifies placement of midside nodes.
- MSHOPTIM - Optimizes a selected mesh based on predefined finite element specifications.
- MSHPATTERN - Specifies pattern to be used for mapped triangle meshing.
- MSOLVE - Starts multiple solutions for an acoustic analysis.
- MSOPT - Specifies solution options for a multistage cyclic symmetry analysis.
- /MSTART - Controls the initial GUI components.
- MSTOLE - Adds two extra nodes from FLUID116 elements to SURF151 or SURF152 elements for convection analyses.
- *MULT - Performs the matrix multiplication M3 = M1(T1)*M2(T2).
- *MWRITE - Writes a matrix to a file in a formatted sequence.
- MXPAND - Specifies modal or buckling analysis expansion options.