/Collapse all
- L - Defines a line between two keypoints.
- L2ANG - Generates a line at an angle with two existing lines.
- L2TAN - Generates a line tangent to two lines.
- LANBOPTION - Specifies Block Lanczos eigensolver options.
- LANG - Generates a straight line at an angle with a line.
- LARC - Defines a circular arc.
- /LARC - Creates annotation arcs (GUI).
- LAREA - Generates the shortest line between two keypoints on an area.
- LARGE - Finds the largest (the envelope) of three variables.
- LATT - Associates element attributes with the selected, unmeshed lines.
- LAYER - Specifies the element layer for which data are to be processed.
- LAYERP26 - Specifies the element layer for which data are to be stored.
- LAYLIST - Lists real constants material properties for layered elements.
- LAYPLOT - Displays the layer stacking sequence for layered elements.
- LCABS - Specifies absolute values for load case operations.
- LCASE - Reads a load case into the database.
- LCCALC - Specifies "Load case settings" as the subsequent status topic.
- LCCAT - Concatenates multiple lines into one line for mapped meshing.
- LCDEF - Creates a load case from a set of results on a results file.
- LCFACT - Defines scale factors for load case operations.
- LCFILE - Creates a load case from an existing load case file.
- LCLEAR - Deletes nodes and line elements associated with selected lines.
- LCOMB - Combines adjacent lines into one line.
- LCOPER - Performs load case operations.
- LCSEL - Selects a subset of load cases.
- LCSL - Divides intersecting lines at their point(s) of intersection.
- LCSUM - Specifies whether to process non-summable items in load case operations.
- LCWRITE - Creates a load case by writing results to a load case file.
- LCZERO - Zeroes the results portion of the database.
- LDELE - Deletes unmeshed lines.
- LDIV - Divides a single line into two or more lines.
- LDRAG - Generates lines by sweeping a keypoint pattern along path.
- LDREAD - Reads results from the results file and applies them as loads.
- LESIZE - Specifies the divisions and spacing ratio on unmeshed lines.
- LEXTND - Extends a line at one end by using its slope.
- LFILLT - Generates a fillet line between two intersecting lines.
- LFSURF - Generates surface elements overlaid on the edge of existing solid elements and assigns the extra node as the closest fluid element node.
- LGEN - Generates additional lines from a pattern of lines.
- LGLUE - Generates new lines by "gluing" lines.
- LGWRITE - Writes the database command log to a file.
- /LIGHT - Specifies the light direction for the display window.
- LINA - Finds the intersection of a line with an area.
- LINE - Specifies "Lines" as the subsequent status topic.
- /LINE - Creates annotation lines (GUI).
- LINES - Specifies the length of a printed page.
- LINL - Finds the common intersection of lines.
- LINP - Finds the pairwise intersection of lines.
- LINV - Finds the intersection of a line with a volume.
- LIST - Lists out the sets in the results file.
- *LIST - Displays the contents of an external, coded file.
- LLIST - Lists the defined lines.
- LMESH - Generates nodes and line elements along lines.
- LNSRCH - Activates a line search to be used with Newton-Raphson.
- LOCAL - Defines a local coordinate system by a location and orientation.
- LOVLAP - Overlaps lines.
- LPLOT - Displays the selected lines.
- LPTN - Partitions lines.
- LREFINE - Refines the mesh around specified lines.
- LREVERSE - Reverses the normal of a line, regardless of its connectivity or mesh status.
- LROTAT - Generates circular lines by rotating a keypoint pattern about an axis.
- LSBA - Subtracts areas from lines.
- *LSBAC - Performs the solve (forward/backward substitution) of a factorized linear system.
- LSBL - Subtracts lines from lines.
- LSBV - Subtracts volumes from lines.
- LSBW - Subtracts the intersection of the working plane from lines (divides lines).
- LSCLEAR - Clears loads and load step options from the database.
- LSDELE - Deletes load step files.
- *LSDUMP - Dumps a linear solver engine to a binary File.
- LSEL - Selects a subset of lines.
- *LSENGINE - Creates a linear solver engine.
- *LSFACTOR - Performs the numerical factorization of a linear solver system.
- LSLA - Selects those lines contained in the selected areas.
- LSLK - Selects those lines containing the selected keypoints.
- LSOPER - Specifies "Load step operations" as the subsequent status topic.
- /LSPEC - Specifies annotation line attributes (GUI).
- LSREAD - Reads load and load step option data into the database.
- *LSRESTORE - Restores a linear solver engine from a binary file.
- LSSCALE - Generates a scaled set of lines from a pattern of lines.
- LSSOLVE - Reads and solves multiple load steps.
- LSTR - Defines a straight line irrespective of the active coordinate system.
- LSUM - Calculates and prints geometry statistics of the selected lines.
- LSWRITE - Writes load and load step option data to a file.
- /LSYMBOL - Creates annotation symbols (GUI).
- LSYMM - Generates lines from a line pattern by symmetry reflection.
- LTAN - Generates a line at the end of, and tangent to, an existing line.
- LTRAN - Transfers a pattern of lines to another coordinate system.
- LUMPM - Specifies a lumped mass matrix formulation.
- LVSCALE - Scales the load vector for mode-superposition analyses.
- LWPLAN - Defines the working plane normal to a location on a line.