/Collapse all
- GAUGE - Gauges the problem domain for a magnetic edge-element formulation.
- GCDEF - Defines interface interactions between general contact surfaces.
- GCGEN - Creates contact elements for general contact.
- /GCMD - Controls the type of element or graph display used for the GPLOT command.
- /GCOLUMN - Allows the user to apply a label to a specified curve.
- GENOPT - Specifies "General options" as the subsequent status topic.
- GEOM - Defines the geometry specifications for the radiation matrix calculation.
- GEOMETRY - Specifies "Geometry" as the subsequent status topic.
- *GET - Retrieves a value and stores it as a scalar parameter or part of an array parameter.
- /GFILE - Specifies the pixel resolution on Z-buffered graphics files.
- /GFORMAT - Specifies the format for the graphical display of numbers.
- /GLINE - Specifies the element outline style.
- /GMARKER - Specifies the curve marking style.
- GMATRIX - Performs electric field solutions and calculates the self and mutual conductance between multiple conductors.
- GMFACE - Specifies the facet representation used to form solid models.
- *GO - Causes a specified line on the input file to be read next.
- /GO - Reactivates suppressed printout.
- /GOLIST - Reactivates the suppressed data input listing.
- /GOPR - Reactivates suppressed printout.
- GPLOT - Controls general plotting.
- /GRAPHICS - Defines the type of graphics display.
- /GRESUME - Sets graphics settings to the settings on a file.
- /GRID - Selects the type of grid on graph displays.
- /GROPT - Sets various line graph display options.
- GRP - Specifies the grouping mode combination method.
- /GRTYP - Selects single or multiple Y-axes graph displays.
- /GSAVE - Saves graphics settings to a file for later use.
- GSBDATA - Specifies the constraints or applies the load at the ending point for generalized plane strain option.
- GSGDATA - Specifies the reference point and defines the geometry in the fiber direction for the generalized plane strain element option.
- GSLIST - When using generalized plane strain, lists the input data or solutions.
- GSSOL - Specifies which results to store from the results file when using generalized plane strain.
- /GST - Enables the Graphical Solution Tracking (GST) feature.
- GSUM - Calculates and prints geometry items.
- /GTHK - Sets line thicknesses for graph lines.
- /GTYPE - Controls the entities that the GPLOT command displays.