/Collapse all
- /BATCH - Sets the program mode to "batch."
- BCSOPTION - Sets memory option for the sparse solver.
- BETAD - Defines the stiffness matrix multiplier for damping.
- BF - Defines a nodal body-force load.
- BFA - Defines a body-force load on an area.
- BFADELE - Deletes body-force loads on an area.
- BFALIST - Lists the body-force loads on an area.
- BFCUM - Specifies that nodal body-force loads are to be accumulated.
- BFDELE - Deletes nodal body-force loads.
- BFE - Defines an element body-force load.
- BFECUM - Specifies whether to ignore subsequent element body force loads.
- BFEDELE - Deletes element body-force loads.
- BFELIST - Lists the element body-force loads.
- BFESCAL - Scales element body-force loads.
- BFINT - Activates the body force interpolation operation.
- BFK - Defines a body-force load at a keypoint.
- BFKDELE - Deletes body-force loads at a keypoint.
- BFKLIST - Lists the body-force loads at keypoints.
- BFL - Defines a body-force load on a line.
- BFLDELE - Deletes body-force loads on a line.
- BFLIST - Lists the body-force loads on nodes.
- BFLLIST - Lists the body-force loads on a line.
- BFPORT - Transfers body-force loads (heat generation, temperature, and body-force density) from selected MESH200 elements to reinforcing elements.
- BFSCALE - Scales body-force loads at nodes.
- BFTRAN - Transfers solid model body-force loads to the finite element model.
- BFUNIF - Assigns a uniform body-force load to all nodes.
- BFV - Defines a body-force load on a volume.
- BFVDELE - Deletes body-force loads on a volume.
- BFVLIST - Lists the body-force loads on a volume.
- BIOOPT - Specifies "Biot-Savart options" as the subsequent status topic.
- BIOT - Calculates the Biot-Savart source magnetic field intensity.
- BLC4 - Creates a rectangular area or block volume by corner points.
- BLC5 - Creates a rectangular area or block volume by center and corner points.
- BLOCK - Creates a block volume based on working plane coordinates.
- BOOL - Specifies "Booleans" as the subsequent status topic.
- BOPTN - Specifies Boolean operation options.
- BSAX - Specifies the axial strain and axial force relationship for beam sections.
- BSMD - Specifies mass per unit length for a nonlinear general beam section.
- BSM1 - Specifies the bending curvature and moment relationship in plane XZ for beam sections.
- BSM2 - Specifies the bending curvature and moment relationship in plane XY for beam sections.
- BSPLIN - Generates a single line from a spline fit to a series of keypoints.
- BSS1 - Specifies the transverse shear strain and force relationship in plane XZ for beam sections.
- BSS2 - Specifies the transverse shear strain and force relationship in plane XY for beam sections.
- BSTE - Specifies a thermal expansion coefficient for a nonlinear general beam section.
- BSTQ - Specifies the cross section twist and torque relationship for beam sections.
- BTOL - Specifies the Boolean operation tolerances.
- BUCOPT - Specifies buckling analysis options.