Mesh

Defines a Mesh.

Declaration Syntax

public class Mesh : DataModelObject, IFolderDataModelObject

Table 836: Members

Property	AspectRatio	Gets or sets the AspectRatio.
Property	AutoMapFillets	Gets or sets the Auto-Map Fillets in Mesh. Auto-Map Fillets enables the mesh generator to detect and map fillets within the limits specified by AutoMapFilletsMinimumRadius and AutoMapFilletsMaximumRadius. Default: False.
Property	AutoMapFilletsMaximumRadius	Gets or sets the Maximum Radius for Auto-Map Fillets. Default: 5 * Element Size.
Property	AutoMapFilletsMinimumRadius	Gets or sets the Minimum Radius for Auto-Map Fillets. Default: 0.5 * Element Size.
Property	AutomaticMeshBasedDefeaturing	Gets or sets the AutomaticMeshBasedDefeaturing.
Property	Average	Gets the Average.
Property	Beam3	Gets the Beam3.
Property	Beam4	Gets the Beam4.
Property	BeamElements	Gets the BeamElements.
Property	CaptureCurvature	Gets or sets the CaptureCurvature.
Property	CaptureProximity	Gets or sets the CaptureProximity.
Property	CheckMeshQuality	Gets or sets the CheckMeshQuality.
Property	Children	Gets the list of children.
Property	CollisionAvoidance	Gets or sets the CollisionAvoidance.
Property	Comments	Gets the list of associated comments.
Property	ConnectionSize	Gets or sets the ConnectionSize.
Property	ConnectionTolerance	Gets or sets the ConnectionTolerance.
Property	ConnectionToleranceList	Gets or sets the ConnectionToleranceList.
Property	CoplanarAngleTol	Gets or sets the CoplanarAngleTol.
Property	CornerNodes	Gets the CornerNodes.
Property	CurrentConfiguration	Gets the Assembly Mesh's current configuration Id.
Property	CurvatureNormalAngle	Gets or sets the CurvatureNormalAngle.
Property	DataModelObjectCategory	Gets the current DataModelObject's category.
Property	DefaultShellMesher	Gets or sets the default meshing engine used to mesh sheet bodies. The default value is Quad Dominant.
Property	DefeatureTolerance	Gets or sets the DefeatureTolerance.
Property	DisplayStyle	Gets or sets the DisplayStyle.
Property	ElementOrder	Gets or sets the ElementOrder.
Property	Elements	Gets the Elements.
Property	ElementSize	Gets or sets the ElementSize.
Property	ExportFormat	Gets or sets the ExportFormat.
Property	ExportUnit	Gets or sets the ExportUnit.
Property	ExtraRetriesForAssembly	Gets or sets the ExtraRetriesForAssembly.
Property	Figures	Gets the list of associated figures.
Property	FilletRatio	Gets or sets the FilletRatio.
Property	FirstLayerHeight	Gets or sets the FirstLayerHeight.
Property	GapFactor	Gets or Sets the Gap factor for Global Inflation
Property	GasketElements	Gets the GasketElements.
Property	GeneratePinchOnRefresh	Gets or sets the GeneratePinchOnRefresh.
Property	GlobalUseCustomTargetLimit	Gets or sets the GlobalUseCustomTargetLimit.
Property	GrowthRate	Gets or sets the GrowthRate.
Property	GrowthRateSF	Gets or sets the GrowthRateSF.
Property	GrowthRateType	Gets or sets the GrowthRateType.
Property	Hex20	Gets the Hex20.
Property	Hex8	Gets the Hex8.
Property	HoleRemovalTolerance	Gets or sets the HoleRemovalTolerance.
Property	Images	Gets the list of associated images.
Property	InflationAlgorithm	Gets or sets the InflationAlgorithm.
Property	InflationElementType	Gets or Sets the InflationElementType
Property	InflationOption	Gets or sets the InflationOption.
Property	InitialSizeSeed	Gets or sets the InitialSizeSeed.
Property	InternalObject	Gets the internal object. For advanced usage only.
Property	Line2	Gets the Line2.
Property	Line3	Gets the Line3.
Property	Maximum	Gets the Maximum.
Property	MaximumAngle	Gets or sets the MaximumAngle.
Property	MaximumHeightOverBase	Gets or sets the MaximumHeightOverBase.
Property	MaximumLayers	Gets or sets the MaximumLayers.
Property	MaximumSize	Gets or sets the MaximumSize.
Property	MaximumThickness	Gets or sets the MaximumThickness.
Property	MeshBasedConnection	Gets or sets the MeshBasedConnection.
Property	MeshMetric	Gets or sets the MeshMetric.
Property	MeshMorphing	Gets or sets the MeshMorphing.
Property	Method	Gets or sets the Method.
Property	MidNodes	Gets the MidNodes.
Property	MinimizeNumTriangles	Gets or sets the TriangleReduction option for Batch Connections.
Property	Minimum	Gets the Minimum.
Property	MinimumEdgeLength	Gets the MinimumEdgeLength.
Property	MinimumSize	Gets or sets the MinimumSize.
Property	MultiConnectionSteps	Gets or sets the MultiConnectionSteps.
Property	NamedSelection	Gets or sets the NamedSelection.
Property	Nodes	Gets the Nodes.
Property	NumberOfCPUsForParallelPartMeshing	Gets or sets the NumberOfCPUsForParallelPartMeshing.
Property	NumberOfRetries	Gets or sets the NumberOfRetries.
Property	NumberOfShellMeshQualityMetrics	Gets the number of Mesh Quality Metrics
Property	NumLayers	Gets or Sets the Number of Layers of Global Inflation
Property	OrientationNodes	Gets the OrientationNodes.
Property	PhysicsPreference	Gets or sets the PhysicsPreference.
Property	PinchTolerance	Gets or sets the PinchTolerance.
Property	ProximityGapFactor	Gets or sets the ProximityGapFactor.
Property	ProximityMinimumSize	Gets or sets the ProximityMinimumSize.
Property	ProximitySizeSources	Gets or sets the ProximitySizeSources.
Property	Pyramid13	Gets the Pyramid13.
Property	Pyramid5	Gets the Pyramid5.
Property	Quad4	Gets the Quad4.
Property	Quad8	Gets the Quad8.
Property	QuadMesh	Gets or sets the QuadMesh.
Property	ReadOnly	Gets the ReadOnly.
Property	Relevance	Gets or sets the Relevance.
Property	RelevanceCenter	Gets or sets the RelevanceCenter.
Property	Resolution	Gets or sets the Resolution.
Property	RigidBodyBehavior	Gets or sets the BoundaryCondition.
Property	RigidBodyFaceMeshType	Gets or sets the RigidBodyFaceMeshType.
Property	ShapeChecking	Gets or sets the ShapeChecking.
Property	SharedNodes	Gets the SharedNodes.
Property	SheetLoopRemoval	Gets or sets the SheetLoopRemoval.
Property	ShellElements	Gets the ShellElements.
Property	ShowDetailedStatistics	Gets or sets the ShowDetailedStatistics.
Property	Smoothing	Gets or sets the Smoothing.
Property	SmoothingIterations	Gets or sets the SmoothingIterations.
Property	SolidElements	Gets the SolidElements.
Property	SolidShellElements	Gets the SolidShellElements.
Property	SolverPreference	Gets or sets the SolverPreference.
Property	SpanAngleCenter	Gets or sets the SpanAngleCenter.
Property	StandardDeviation	Gets the StandardDeviation.
Property	StraightSidedElements	Gets or sets the StraightSidedElements.
Property	TargetCharacteristicLength	Gets or sets the TargetCharacteristicLength.
Property	TargetExplicitAspectRatio	Gets or sets the TargetExplicitAspectRatio.
Property	TargetQuality	Gets or sets the TargetQuality.
Property	TargetSkewness	Gets or sets the TargetSkewness.
Property	Tet10	Gets the Tet10.
Property	Tet4	Gets the Tet4.
Property	TopologyChecking	Gets or sets the TopologyChecking.
Property	TransitionOption	Gets or sets the TransitionOption.
Property	TransitionRatio	Gets or sets the TransitionRatio.
Property	Tri3	Gets the Tri3.
Property	Tri6	Gets the Tri6.
Property	TriangleSurfaceMesher	Gets or sets the TriangleSurfaceMesher.
Property	UseAdaptiveSizing	Gets or sets the UseAdaptiveSizing.
Property	UseAdvancedSizeFunction	Gets or sets the UseAdvancedSizeFunction.
Property	UseAutomaticInflation	Gets or sets the UseAutomaticInflation.
Property	UseFixedSizeFunctionForSheets	Gets or sets the UseFixedSizeFunctionForSheets.
Property	UsePostSmoothing	Gets or sets the UsePostSmoothing.
Property	UseSheetThicknessForPinch	Gets or sets the UseSheetThicknessForPinch.
Property	ViewAdvancedOptions	Gets or sets the ViewAdvancedOptions.
Property	Wedge15	Gets the Wedge15.
Property	Wedge6	Gets the Wedge6.
Property	Worksheet	Get the MeshControlWorksheet action.
Method	ActivateAllSolidSurfaceWorksheetRows()	No details are provided for this entry.
Method	ActivateAllSurfaceWorksheetRows()	No details are provided for this entry.
Method	ActivateAllVolumeWorksheetRows()	No details are provided for this entry.
Method	AddAutomaticMethod()	Creates a new AutomaticMethod
Method	AddComment()	Creates a new child Comment.
Method	AddConnect()	Creates a new Connect Control
Method	AddContactMatchGroup()	Add a new AddContactMatchGroup.
Method	AddContactSizing()	Creates a new ContactSizing
Method	AddDeviation()	Creates a new SagControl
Method	AddDirectMorph()	Add a new DirectMorph.
Method	AddFaceMeshing()	Creates a new FaceMeshing
Method	AddFeatureSuppress()	Creates a new FeatureSuppress
Method	AddFigure()	Creates a new child Figure.
Method	AddGasket()	Adds a Gasket Object under Mesh
Method	AddGeometryFidelity()	Creates a new GeometryFidelity
Method	AddImage(string)	Creates a new child Image. If a filePath is provided, the image will be loaded from that file, if not, the image will be a screen capture of the Geometry window.
Method	AddInflation()	Creates a new Inflation
Method	AddManualMeshConnection()	Add a new ManualMeshConnection
Method	AddMatchControl()	Creates a new MatchControl
Method	AddMeshConnectionGroup()	Add a new MeshConnectionGroup.
Method	AddMeshCopy()	Creates a new MeshCopy
Method	AddMeshLayers()	Adds Mesh Layers when contour enabled in Mesh Quality Workhseet mode.
Method	AddNodeMerge()	Add a new NodeMerge.
Method	AddNodeMergeGroup()	Add a new NodeMergeGroup.
Method	AddPinch()	Creates a new Pinch
Method	AddPullExtrude()	Add a new Pull (Extrude).
Method	AddPullRevolve()	Add a new Pull (Revolve).
Method	AddPullSurfaceCoating()	Add a new Pull (Surface Coating)).
Method	AddRefinement()	Creates a new Refinement
Method	AddRepairTopology()	Creates a new RepairTopology
Method	AddSizing()	Creates a new Sizing
Method	AddTopologySuppressControl()	Creates a new TopologySuppressControl
Method	AddWasher()	Creates a new SagControl
Method	AddWeld()	Creates a new WeldControl
Method	CleanPartOrBody(IEnumerable)	Clear generated data for parts and/or bodies provided.
Method	ClearGeneratedData()	Run the ClearGeneratedData action.
Method	CreateMQSolidSurfaceElementsNamedSelection(MeshMetricType, uint)	Create Mesh Quality SolidSurface Element Name Selection
Method	CreateMQSurfaceElementsNamedSelection(MeshMetricType, uint)	Create Mesh Quality Surface Element Named Selection
Method	CreateMQVolumeElementsNamedSelection(MeshMetricType, uint)	Create Mesh Quality Volume Element Name Selection
Method	CreatePinchControls()	Run the CreatePinchControls action.
Method	DeactivateAllSolidSurfaceWorksheetRows()	No details are provided for this entry.
Method	DeactivateAllSurfaceWorksheetRows()	No details are provided for this entry.
Method	DeactivateAllVolumeWorksheetRows()	No details are provided for this entry.
Method	ExportWeldDefinitionFile(string)	Export the weld definition file to the specified location. If the folder does not exist or file cannot be written to the location, an exception will be thrown. Pre-existing files will be overwritten.
Method	GenerateMesh()	Run the GenerateMesh action.
Method	GetActiveSurfaceMeshQuality(MeshMetricType)	Get Active User Mesh Quality
Method	GetChildren<ChildrenType>(bool, IList<ChildrenType>)	Gets the list of children, filtered by type.
Method	GetChildren(DataModelObjectCategory, bool, IList<IDataModelObject>)	Gets the list of children, filtered by type.
Method	GetIsShellTargetMetric(MeshMetricType)	Get Shell Target Metric
Method	GetIsSolidSurfaceTargetMetric(MeshMetricType)	Get SolidSurface Target Metric
Method	GetIsSolidTargetMetric(MeshMetricType)	Get Solid Target Metric
Method	GetMeshMetricOptions(MeshMetricType)	No details are provided for this entry.
Method	GetSolidSurfaceMeshMetrics()	No details are provided for this entry.
Method	GetSolidSurfaceMeshQualityAverageMetricValue(MeshMetricType)	Get Mesh Quality Average Metric Value
Method	GetSolidSurfaceMeshQualityCountFailed(MeshMetricType)	Get Mesh Quality Count Failed
Method	GetSolidSurfaceMeshQualityErrorLimit(MeshMetricType)	Get Mesh Quality Error Limit
Method	GetSolidSurfaceMeshQualityName(MeshMetricType)	Get Mesh Quality Name
Method	GetSolidSurfaceMeshQualityPercentageFailed(MeshMetricType)	Get Mesh Quality Percentage Failed
Method	GetSolidSurfaceMeshQualityWarningCountFailed(MeshMetricType)	Get Mesh Quality Warning Count Failed
Method	GetSolidSurfaceMeshQualityWarningLimit(MeshMetricType)	Get Mesh Quality Warning Limit
Method	GetSolidSurfaceMeshQualityWarningPercentageFailed(MeshMetricType)	Get Mesh Quality Warning Percentage Failed
Method	GetSolidSurfaceMeshQualityWorstMetricBackgroundColor(MeshMetricType)	Get Mesh Quality Worst Metric BackgroundColor
Method	GetSolidSurfaceMeshQualityWorstMetricValue(MeshMetricType)	Get Mesh Quality Worst Metric Value
Method	GetSurfaceMeshQualityAverageMetricValue(MeshMetricType)	Get Mesh Quality Average Metric Value
Method	GetSurfaceMeshQualityCountFailed(MeshMetricType)	Get Mesh Quality Count Failed
Method	GetSurfaceMeshQualityErrorLimit(MeshMetricType)	Get User Mesh Quality Error Limit
Method	GetSurfaceMeshQualityName(MeshMetricType)	Get Mesh Quality Name
Method	GetSurfaceMeshQualityPercentageFailed(MeshMetricType)	Get Mesh Quality Percentage Failed
Method	GetSurfaceMeshQualityWarningCountFailed(MeshMetricType)	Get Mesh Quality Warning Count Failed
Method	GetSurfaceMeshQualityWarningLimit(MeshMetricType)	Get User Mesh Quality Warning Limit
Method	GetSurfaceMeshQualityWarningPercentageFailed(MeshMetricType)	Get Mesh Quality Warning Percentage Failed
Method	GetSurfaceMeshQualityWorstMetricValue(MeshMetricType)	Get Mesh Quality Worst Metric Value
Method	GetVolumeMeshMetrics()	No details are provided for this entry.
Method	GetVolumeMeshQualityAverageMetricValue(MeshMetricType)	Get Mesh Quality Average Metric Value
Method	GetVolumeMeshQualityCountFailed(MeshMetricType)	Get Mesh Quality Count Failed
Method	GetVolumeMeshQualityErrorLimit(MeshMetricType)	Get Mesh Quality Error Limit
Method	GetVolumeMeshQualityName(MeshMetricType)	Get Mesh Quality Name
Method	GetVolumeMeshQualityPercentageFailed(MeshMetricType)	Get Mesh Quality Percentage Failed
Method	GetVolumeMeshQualityWarningCountFailed(MeshMetricType)	Get Mesh Quality Warning Count Failed
Method	GetVolumeMeshQualityWarningLimit(MeshMetricType)	Get Mesh Quality Warning Limit
Method	GetVolumeMeshQualityWarningPercentageFailed(MeshMetricType)	Get Mesh Quality Warning Percentage Failed
Method	GetVolumeMeshQualityWorstMetricBackgroundColor(MeshMetricType)	Get Mesh Quality Worst Metric BackgroundColor
Method	GetVolumeMeshQualityWorstMetricValue(MeshMetricType)	Get Mesh Quality Worst Metric Value
Method	IsMeshMetricVisible(uint)	No details are provided for this entry.
Method	LoadMQWorksheetFile(string)	No details are provided for this entry.
Method	PinchControlGeomtry(MeshControlPinchGeomtryType)	Set the geometry type for the Pinch Control.
Method	PreviewInflation()	Run the PreviewInflation action.
Method	PreviewMeshOnAllWelds()	Preview model mesh on all weld controls of the Mesh.
Method	PreviewMeshOnWeld(IDataModelObject)	Preview model mesh on one weld control provided.
Method	PreviewMeshOnWelds(IEnumerable<IDataModelObject>)	Preview model mesh on weld controls provided.
Method	PreviewMeshOnWeldWorksheet(IDataModelObject, IEnumerable<int>)	Preview model mesh on selected weld control worksheet entries.
Method	PreviewSurfaceMesh()	Run the PreviewSurfaceMesh action.
Method	PreviewWelds()	Preview Welds.
Method	RemoveMeshLayers()	Removes Mesh Layers when contour enabled in Mesh Quality Workhseet mode.
Method	SaveMQWorksheetFile(string)	No details are provided for this entry.
Method	SetActiveSolidSurfaceMeshQuality(MeshMetricType, double)	Set Active Mesh Quality
Method	SetActiveSurfaceMeshQuality(MeshMetricType, double)	Set Active Mesh Quality
Method	SetActiveVolumeMeshQuality(MeshMetricType, double)	Set Active Mesh Quality
Method	SetMeshMetricOptions(MeshMetricType, MetricPreference)	No details are provided for this entry.
Method	SetSolidMeshMetricLimits(MeshMetricType, Quantity, Quantity)	No details are provided for this entry.
Method	SetSolidSurfaceMeshMetricLimits(MeshMetricType, Quantity, Quantity)	No details are provided for this entry.
Method	SetSolidSurfaceMeshQualityErrorLimit(MeshMetricType, double)	Set Mesh Quality Error Limit
Method	SetSolidSurfaceMeshQualityErrorLimit(MeshMetricType, Quantity)	Set Mesh Quality Error Limit
Method	SetSolidSurfaceMeshQualityWarningLimit(MeshMetricType, double)	Set Mesh Quality Warning Limit
Method	SetSolidSurfaceMeshQualityWarningLimit(MeshMetricType, Quantity)	Set Mesh Quality Warning Limit
Method	SetSurfaceMeshMetricLimits(MeshMetricType, Quantity, Quantity)	No details are provided for this entry.
Method	SetSurfaceMeshQualityErrorLimit(MeshMetricType, double)	Set Mesh Quality Error Level
Method	SetSurfaceMeshQualityErrorLimit(MeshMetricType, Quantity)	Set Mesh Quality Error Level
Method	SetSurfaceMeshQualityWarningLimit(MeshMetricType, double)	Set Mesh Quality Warning Limit
Method	SetSurfaceMeshQualityWarningLimit(MeshMetricType, Quantity)	Set Mesh Quality Warning Limit
Method	SetVolumeMeshQualityErrorLimit(MeshMetricType, double)	Set Mesh Quality Error Limit
Method	SetVolumeMeshQualityErrorLimit(MeshMetricType, Quantity)	Set Mesh Quality Error Limit
Method	SetVolumeMeshQualityWarningLimit(MeshMetricType, double)	Set Mesh Quality Warning Limit
Method	SetVolumeMeshQualityWarningLimit(MeshMetricType, Quantity)	Set Mesh Quality Warning Limit
Method	ShowAxisymmetricBodies()	Show Axisymmetric bodies.
Method	ShowFeatureSuppressibleFaces()	Run the ShowFeatureSuppressibleFaces action.
Method	ShowMappableBodies()	Run the ShowMappableBodies action.
Method	ShowOverlappingFaces()	Run the ShowOverlappingFaces action.
Method	ShowSweepableBodies()	Run the ShowSweepableBodies action.
Method	ShowUnconnectedFacesNearEdges()	Run the ShowUnconnectedFreeEdges action.
Method	Update()	Run the Update action.