• icon
  • Mechanical User's Guide
  • back
  • forward
Contents
closeexpand
Print page

Chapter 4: General Analysis Workflow

This section describes the overall workflow involved when performing any analysis in the Mechanical application. The following workflow steps are described:

  • 4.1. Create or Resume Analysis Systems
  • 4.2. Define Materials
  • 4.3. Attach Geometry/Mesh
  • 4.4. Define Part Behavior
  • 4.5. Create a Simulation Template
  • 4.6. Create a Geometry in Mechanical
  • 4.7. Define Substructures
  • 4.8. Define Connections
  • 4.9. Apply Mesh Controls and Preview Mesh
  • 4.10. Establish Analysis Settings
  • 4.11. Define Initial Conditions
  • 4.12. Apply Pre-Stress Effects for Implicit Analysis
  • 4.13. Apply Boundary Conditions
  • 4.14. Perform Solution
  • 4.15. Review Results
  • 4.16. Create Report (optional)
« 3.3.20. UI Options 
 4.1. Create or Resume Analysis Systems »

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Release 2025 R1 - © ANSYS, Inc. All rights reserved.