Introduction

This document contains information about beta features for Ansys Discovery 2025 R1, which provide options that are outside of the normal scope of Ansys Discovery.

Disclaimer

  • Ansys, Inc. recommends that you save a separate copy of the project before activating any beta feature so that you can return to the project with only released features.
  • Once enabled, beta features may remain active after they have been disabled, even if the text and graphical interfaces for these features are no longer visible.
  • Beta features have not been fully tested and validated.
  • Ansys, Inc. may, at its discretion, fully release, change, or withdraw beta features in future revisions. It makes no commitment to doing so on any particular schedule.
  • Ansys, Inc. makes no commitment to resolve defects reported against beta features. However, your feedback will help improve the quality of the product.
  • Beta features are not subject to the Ansys Class 3 error reporting system.
  • Ansys, Inc. does not guarantee that script files used with beta features will run successfully from version to version of the software, nor with the final released version of the feature(s). You may need to modify the script files before running them on other versions.

Enabling Beta Features

Most beta features can be selectively turned on/off.

To turn on a beta feature:

  1. Select File Menu > Settings to open the Settings dialog box.
  2. Select Advanced.
  3. In the Beta Options section, enable the beta feature(s) that you want.
  4. Close the Settings dialog box.